Stock width g1 raptor

[2012SVTSC]

I originally installed some extended brake lines on the front but I kept having issues with them being toooo long so I went back to my old +2 front lines and installed a drop bracket.





I have an alinement schedule at ORW Tuesday but looks like I need to take some turns out of the uppers... I got aggressive with the rod ends to help with spring clearance but looks like I need to get that camber under control

 

[2012SVTSC]

And the next project stock width fenders are here...

 

[96f-u250]

Look at SPC 86252 for the lower control arm cams. The 86250s werent cutting it for me.

 

[2012SVTSC]

Look at SPC 86252 for the lower control arm cams. The 86250s werent cutting it for me.

I'm using the 86252, I have all the blocks welded.

 

[96f-u250]

Nice! Im hoping they also help my LCA bushings last longer too. Were your “blocks” spinning before you welded them?

 

[2012SVTSC]

Nice! Im hoping they also help my LCA bushings last longer too. Were your “blocks” spinning before you welded them?

They did tilt slightly they have a dowl to hold them in place but I wanted it more solid it just seemed like a good idea at the time tbh.

 

[2012SVTSC]

Working on my AUX fuel tank mount while im trying to fix my rear shocks ,
I was short a bunch of hardware but the front support is coming along, it will bolted to my "modular" resivor mounts using the tanks nut inserts and a 1" ratchet strap will lock it in for the front:





This is the idea: no rear mount yet, so dont worry about the tilt

 

[2012SVTSC]

Installed these 'through the body mount' resivor mounts yesterday pretty stoked how they came out. 3d printed ABS bushings...

 

[Donttellmywiferacing]

Risking heat stoke I decided to do some more mods and maintance...

Tune up table:
View attachment 26267

If you notice In my build I never had a gusset on my passenger side steering knuckle, that is because it has been bent see some comparisons:
Old v New
View attachment 26257
Gusset allinment on old:
View attachment 26259
Gusset allinment on new:
View attachment 26258

New Knuckle build, ford hubs, IWE delete, SDHQ Gusset:
View attachment 26260
View attachment 26262

Finally I got my upper that work best with my travel figured out so if anyone wants some used RPG uppers let me know:
View attachment 26265
View attachment 26266
The RPGs have better spring clearance but less usable angle.

Whose upper is that next to the RPG? Looks like a nice unit. I recently picked up some gusseted spindles and some fabbed Burg uppers, hoping to find a stock width fabbed lower arm eventually

 

[2012SVTSC]

Whose upper is that next to the RPG? Looks like a nice unit. I recently picked up some gusseted spindles and some fabbed Burg uppers, hoping to find a stock width fabbed lower arm eventually

Those are the blitzkriegoffroad.com ones.