UR_Mawm69
Well-known member
and then............. i WANT to build fucking steering for it.
which is yet another fucking project.
which is yet another fucking project.
Chop Shop Builds
- Thread starter UR_Mawm69
- Start date
SaltyMethods
Well-known member
You caannn doooo iiiiittttt.....!!!
UR_Mawm69
Well-known member
JUST SO I CAN HAVE THE LIST ON THE LAST/MOST RECENT PAGE TO LOOK AT.......
1. take the whole exhaust system off, since im probably going to have to have a full custom one made anyways........
2. hook the engine hoist up to the motor first and get the weight off it
3. snake the motor mounts off
4. jack up the trans off the mount, and get it on jack stands or something it can set on (which im pretty sure is gonna be a task of its own since the fucking trans and motor is touching the firewall pretty much everywhere it can)
5. CUT OFF THE RAD ARM/TRANS CROSSMEMBER MOUNTS
6. then ill pull the motor trans forward enough to get me some room between the engine/trans and the firewall, and get it where it seems to be set and everything will clear. along with this, i need to get a new radiator and fans and figure out that whole mess. where its gonna go, what'll fit, where it'll fit
7. all of that while planning for the trans crossmember/radius arm/ and motor mounts
2. hook the engine hoist up to the motor first and get the weight off it
3. snake the motor mounts off
4. jack up the trans off the mount, and get it on jack stands or something it can set on (which im pretty sure is gonna be a task of its own since the fucking trans and motor is touching the firewall pretty much everywhere it can)
5. CUT OFF THE RAD ARM/TRANS CROSSMEMBER MOUNTS
6. then ill pull the motor trans forward enough to get me some room between the engine/trans and the firewall, and get it where it seems to be set and everything will clear. along with this, i need to get a new radiator and fans and figure out that whole mess. where its gonna go, what'll fit, where it'll fit
7. all of that while planning for the trans crossmember/radius arm/ and motor mounts
Last edited:
UR_Mawm69
Well-known member
driveshaft removed, and exhasut/mufflers removed.
still need to pull the headers...........
still need to pull the headers...........
UR_Mawm69
Well-known member
Ok, I need to to pull the motor forward to where i can build new motor & trans mounts.
So, I need to unhook all of the wiring to the gauges/firewall. That should be either at the firewall or right on the part.
Pull the headers off because I'm almost positive I'm going to have to have a full exhaust system built, 1 off.
Unbolt the trans/cut all the trans mounts/radius arm mounts off
Then, figure out where I'm going to set/plant the motor for good, then I can start building mounts for it.
And then and then and then.
So, I need to unhook all of the wiring to the gauges/firewall. That should be either at the firewall or right on the part.
Pull the headers off because I'm almost positive I'm going to have to have a full exhaust system built, 1 off.
Unbolt the trans/cut all the trans mounts/radius arm mounts off
Then, figure out where I'm going to set/plant the motor for good, then I can start building mounts for it.
And then and then and then.
UR_Mawm69
Well-known member
Nothing picture worthy but I got a bunch of misc wires unplugged, marked & kinda set aside an whatnot.
Somethings better than nothing, RYT¿¡!?
Somethings better than nothing, RYT¿¡!?
UR_Mawm69
Well-known member
i took 2 pictures of the mess i sort of made/cleaned up yesterday................. that's something, RYT?!?!?!
Last edited:
UR_Mawm69
Well-known member
Similar threads
