Not much left Tacoma left... 4500 koh build

[Hambone]

I also worked on the fuel cell and am extremely stoked on how it came out. Drew it all in 2d cad and cut it all correctly the first time and with no screw ups from the cnc. Never would have thought I would be able to make something like this.

 

[Hambone]

Tons of parts on order and should start coming in next week or the week after. Just been focused up on finishing some stuff I left half done.

Fuel cell tabs. May do something off the top but I’ll wait to see if they’re needed.

 

[Hambone]

Screwed with the front suspension some. I rebent the panhard with a single bend and moved the frame side mount back some. And added a small bend to the draglink to clear the ram.

 

[Hambone]

Finished the b pillar to c pillar tie in.

 

[Hambone]

Engine skid plate. I ended up taking the sub frame apart and sleeved all the main tubes with some 1.75. Engine skid plate was out of 1.75 so sleeved with 1.5.

 

[Hambone]

And finally finished the subframe to frame tubes. Tube work is getting easier. When I started this the two end tubes took me all day to make. I made the 5 tubes between the original two on both driver and passenger in just a few hours today. Feel like there’s good clearance.

 

[Hambone]

And some overall shots that were for the gram.