4x4? Long bed? Diesel? Linked? You got it.

Gearmonkey23

Active member
Joined
Apr 15, 2022
Messages
91
Location
Nipomo
Never really did a complete "build thread" on this truck, why start now?
Bought the truck 12ish years ago bone stock, swore ide never drink or eat in it. 01' Ram 2500 Laramie, and she was cherry. Fast forward 6 years later, and let's cut the everything apart. Kind of a Swiss army knife. 4x4, functional 8' bed, great fuel range, good power, 4.0s and 40's. Heated seats and cup holders. It's like the biggest, coolest, Swiss army knife. But also incredibly impractical for a offroad build. Perfect.
The beginning of the link stages started out with some hack job in Simi Valley, TT motorsports or something. (Jk....?)
Tommy built the bed cage, mounted the links and rear shocks, and stretched the bedsides until the tore to clear 40s. I ran the truck for a year or so, until I realized that the truck did pretty fucking good...good enough that it needed a cage. So naturally, buy huge shocks, seats, harnesses, fuel cell, etc. Cut interior apart, slap one or two tubes In to start the cage, then let truck sit for 5 years. To marinade. Finally got In a position where I could get it finished, and I took it to Nick at NV Fab. He absolutely killed it. They finished the cage, mounted the front shocks, fuel cell, etc. Even leather wrapped a center consol to match the seat colors. Enough writing. It's super cool, it's almost sold like twice, and it's still here. Just need more trips to get it out.
Photo dump!!
 

Attachments

  • IMG_20211208_162946_983.jpg
    IMG_20211208_162946_983.jpg
    304.2 KB · Views: 60
  • IMG_20211208_162946_954.jpg
    IMG_20211208_162946_954.jpg
    316.7 KB · Views: 54
  • 20211208_162319.jpg
    20211208_162319.jpg
    461.9 KB · Views: 52
  • 20211208_162256.jpg
    20211208_162256.jpg
    267.9 KB · Views: 53
  • 64901.jpeg
    64901.jpeg
    134.4 KB · Views: 53
  • 20211108_091039.jpg
    20211108_091039.jpg
    287.8 KB · Views: 56
  • Screenshot_20220221-224305_Messenger.jpg
    Screenshot_20220221-224305_Messenger.jpg
    210.5 KB · Views: 56
  • IMG_20211020_120646_918.jpg
    IMG_20211020_120646_918.jpg
    217.9 KB · Views: 55
  • IMG_20211020_120646_827.jpg
    IMG_20211020_120646_827.jpg
    332.2 KB · Views: 49
  • IMG_20211020_120646_900.jpg
    IMG_20211020_120646_900.jpg
    181.2 KB · Views: 53
  • 20420.jpeg
    20420.jpeg
    191.3 KB · Views: 57
  • received_299869644820102.jpeg
    received_299869644820102.jpeg
    147 KB · Views: 56
  • IMG_20210412_134003_906.jpg
    IMG_20210412_134003_906.jpg
    53.2 KB · Views: 54
  • IMG_20210412_134003_958.jpg
    IMG_20210412_134003_958.jpg
    90.8 KB · Views: 54
  • VID_68360606_154701_417.mp4
    1.7 MB
  • 32923.jpeg
    32923.jpeg
    203.8 KB · Views: 55
  • 20211108_091001.jpg
    20211108_091001.jpg
    306.3 KB · Views: 51
  • 20211108_091024.jpg
    20211108_091024.jpg
    300.2 KB · Views: 47
  • 20211108_091329.jpg
    20211108_091329.jpg
    195.9 KB · Views: 44
  • 20211108_091229.jpg
    20211108_091229.jpg
    214.2 KB · Views: 52
holy mother of sweet sweet dreams that i jizz myself in.
seriously.

i fucking love you for building this. love you even more for posting pictures that ji can visually see.
always a dreamm to do a full kill build on a legitimate fullsize diesel.

still jizzing my panties.
i love you and i love this vehicle.
 
01' so......... im not good with fuckking diiiiiiiiiiiiisels. is it the 12 valve ornah????? it might be in your post but i cant pay attention long enough to read more than a sentence at a time. hah
 
holy mother of sweet sweet dreams that i jizz myself in.
seriously.

i fucking love you for building this. love you even more for posting pictures that ji can visually see.
always a dreamm to do a full kill build on a legitimate fullsize diesel.

still jizzing my panties.
i love you and i love this vehicle.
Haha thanks man!
 
pass prerunners in the big stuff in a 7300lb tractor.

if i could somehow acquire that kind of fucking money, id buy this thing in a heartbeat JUST for this reason. haha. and itd prolly be more of a pussygetter than my current truck actually LABELED as pussygetter. hahaha
 
So, after the longest four sail ad I've ever ran (3ish years...) it never sailed. So, dump more money into it!
It always had a front end tick/clunk over small chatter, big hits, errrrthang. It had a distinctive thunk that I could never figure out, so we decided to cut the thing apart and rebuild the front end. Getting rid of the synergy T style steering and synergy track bar. With the 4.0s, the front axle swung side to side just enough to make the coils rub the shock body at full bump and full droop. I was never fully satisfied with that, and finally decided to fix it. 14" 4.0 shock up front and I was limited to 12" of travel because of the swing. From full bump to full droop, it had just over 2.2" of side to side movement, which kinda sucked, even though the thing worked great. Going to full cross over steering and custom track bar setup, and now it will cycle the full 14", with ~.86" of side to side movement (on the computer, anyways). Basically no bumpsteer for a shitty dodge. They offered bump steer as an option for all 2nd gens from factory. So between that, and Thuren working me up some new ninja valving specs, front end is getting dialed in...
Now for the rear saga...
Ever since the truck got caged, it's had a HORRID growl/howl that reverbs into the cab. You could drive the shit out of it, and the diff would never get hot. Put 2k miles on it, pulled the cover, perfect clean gear oil. No material. Some people said it's the nature of 4.56 gears, but, those people are shit birds, Randy. Ran the pattern, looks perfect on coast side, can't get a reading on drive side, BUTTFUCKIT. Pinion backlash is 5 thou, a TAD on the tight side, but I've never felt anything tight so what do I know.
Swapped some old U joints, carrier bearing, and then the question of fluid came up... I was running Lucas 75w90 full syn... A buddy from yukon said NOPE. So grabbed some 90w140 SAE and 3 jugs of friction modifier. 2 for the diff, 1 for the night stand. We will see what that does. Waiting for my new edge tuner to show up today. (Wooo for fueling to 3200rpm now!) I'll pull it off the rack, and get it up to a buddies shop to get the steering shit finalized. Hopefully no more noise. My 4.56 gears were installed in 2016 I believe... couple days ago, I noticed some etching on the ring gear... no fucking idea how that got there. See media attached.
Side note: The front driveshaft absolutely starts to bind at 14" full droop. That should remedy itself.

Pics and stuff!
 

Attachments

  • received_23965976143049115.mp4
    1.5 MB
  • 13451.jpeg
    13451.jpeg
    364.8 KB · Views: 30
  • 14779.jpeg
    14779.jpeg
    300.9 KB · Views: 36
  • Screenshot_20230730_100553_Photos.jpg
    Screenshot_20230730_100553_Photos.jpg
    634.2 KB · Views: 36
  • 20230610_074818.jpg
    20230610_074818.jpg
    239.8 KB · Views: 37
  • 20230610_073442.jpg
    20230610_073442.jpg
    297.4 KB · Views: 40
What's the max vid length we can post here? Have the only cool vid of my truck ever, but it's 22 seconds and says it's too big...
 
Not sure... Can you post it to youtube or you can post the link you have made on INstagram if you did it that way.
 
Back
Top