The Turbo Glue Factory: Boosted Colt Build

[turbomonty]

1 broke it down the middle on the press brake
2 pressed it down in the press frame and bend up the 2 side angles with a crow bar. lol
3 used a round pipe on the front

 

[turbomonty]

Super blue balls, I have to stop and go to a baby shower

 

[Turboyota]

Super blue balls, I have to stop and go to a baby shower

Baby showers are for women.

 

[turbomonty]

Single women show up too

 

[turbomonty]

Nice
drivers side rear of the tunnel came out real clean. im going to sizzle in a little piece of sheet on the passenger side to seal it up.

 

[turbomonty]

Finally close enough to paint all of the hard to reach spots. I am sure I will be welding more right through some of this in the future

 

[turbomonty]

Rolled on 2 coats of white. I'll trim it in later I swear!

 

[turbomonty]

Forward or die!

 

[turbomonty]

The rear is almost ready so I can spin her around and hit it from the front side

 

[turbomonty]

Sliced off the 1/2" AN and there was enough meat to run the razor sharp 3/8 pipe tap in there for my -6 feed lines
i was going to weld on the plate and thread that but the existing parts worked great

 

[turbomonty]

Fuck it, the rear is roughed in good enough to spin this bitch around now.

 

[turbomonty]

Too easy with some Dolly's
1 mount the hood
2 add fender mounts
3 out of money and parts.....

EDIT! i just noticed, the front down tubes are at exactly 30 degrees each.
60 degree V6
it is destiny!!!!!

 

[turbomonty]

Interesting, what if I built some cute little beams for up front suspension?
I was thinking double wishbone but with some beams I don't need any upper like a strut set up.
Just some double adjustable coil overs and beams
This would have more room for the headers too

 

[turbomonty]

Tomorrow I will get some mounts going in there

 

[turbomonty]

The old plastic grille is about 10 minutes of drive time to exploding into dust! It has cracks and larges chips missing. I am really wanting to go dual headlights because I fuking love to see shit at night!

 

[turbomonty]

Got some mid fender mounts
I'll put one more front mount when the radiator and intercooler are in place with some kinda sub assembly

 

[turbomonty]

need to come up with a tubular bumper and sick valence theme!
stock for comparison
ill hit up chatbot for some ideas....

 

[turbomonty]

dam

 

[turbomonty]

 

[turbomonty]

kinda dark on the front....