Local Legend Project: Tur-BRO-yota

December 31, 2022.

Got a few dirt miles in. It worked pretty damn well!

Visited ODRMSE Roy
CDA0844D-2932-48ED-AAA8-7EBBE5347F84.jpeg
And then tried to stalk @desert_steve at his work
08BE02ED-E61A-4055-B051-1BCC40983646.jpeg

AF4A71B5-785F-4C9B-B9CA-32BCF09966D2.jpeg

0626D58F-E092-4304-88B2-3AE594AB9DBF.jpeg

1CEAED58-E6FB-4171-8B0A-F76C3FCDB947.jpeg

CA9C2CB6-89C2-4C17-B244-3CF2B242A791.jpeg

B1001FC0-B1D2-4C35-A400-CEA7EDA9CF85.jpeg
 
Feb 13, 2023
KOH

69 dirt miles at KOH. Truck works fucking awesome. Lots of whitetrashkyle fuckery. 10/10 would recommend avoiding Hammertown and the lakebed.

Lots of broken & lost shit(WTK left his toolbox open and lost my dezert jack, a significant spares package, tools, fluids, etc.) broken wheel, broken D44 front axle shaft, got stuck and I had to pull his 7600lb truck out with my 3900lb truck,

Gave a ride to a guy who has a gayass RZR1000 and the truck blew his fucking mind. He was wincing and bracing before the first few big hits, then realized we weren’t in a fucking dicksuck golf cart…

Passed a guy pulling a trailer thru 2.5’ whoops on Ghost rd who looked kinda angry when they passed us on the lake bed when we were drinking beer later. I blew him a kiss.

277DD3E6-C303-46EF-8A5B-D59704671FF1.jpeg

B3DF3658-2D04-424D-8E02-D1D956588FCF.jpeg

CAE3E78A-A789-4338-99E9-560CD0FE5178.jpeg

88A6B42C-26A5-49C3-9642-4B23D3C5C0D2.jpeg

64EF3EB8-F11E-46B2-BD4E-70A688CF3AA0.jpeg

E2769B79-BD35-4F99-AC22-1DC177E2C770.jpeg

0FA73659-6C68-44B0-9F68-9227481BE69D.jpeg

70470CC2-2E96-4962-800A-0C41C842A724.jpeg

34CE20E8-2833-4933-894C-83601DB5F7CC.jpeg

5C481108-EC06-491A-A7CC-E5A3F19D0931.jpeg
 
April 10, 2023

Hub rebuild (just in case after all the carnage caused by my piss-poor prep leading up to the Mojave Trail trip)

Time: 2 hours
Cost: $113 + 1X lugnut

New bearings
New inner lip sea
New 5/8-18 studs
New 5/16-18 flat head drive plate bolts
03529327-2DFF-4E6F-AF9B-92A39E8E0AF2.jpeg

150AEB89-0A4C-4066-B9B6-B9BB732ABB67.jpeg

2EBE4303-EECD-41E0-9156-E1973D3B41DC.jpeg

3821F32C-C80B-44C9-A1B9-20B0DDC0511C.jpeg
 
April 16, 2023

Found lots of cracks on the snouts & uprights, and some at the base of my A-pillars. And my lower drivers side uniball barfed out it’s Kevlar liner. This is the second time I’ve replaced the lower front uniballs since I made the new front end. I need to go back and figure out haw many miles I got on the last set. I have a feeling these didn’t last as long because of all the mud and water on the last Afton/mojave rd trip a couple weeks ago.
66C432E9-35F7-423D-B0CB-ADDB98C38B61.jpeg

0DF88820-70B3-4941-9C3A-2E2BBB9615AB.jpeg

4B785FCB-5884-4D62-8AD5-32D031D10C0C.jpeg

ED9142F3-F540-4363-9A2D-F6DF05B78A87.jpeg

3D17B112-DA81-417E-AF8A-1A029F85A488.jpeg

13151042-AD48-408C-B7A4-15E75992A8EA.jpeg

0B8B399E-0AF1-4D62-8681-45C07AB3327E.jpeg

8C9D111B-6C00-43BE-9419-7DCE20EF5F50.jpeg

98347372-0A56-47DF-B94A-67BA8D2E865E.jpeg

C3C01A77-E2C1-4143-A6E6-BB2400426132.jpeg
 
May 1, 2023

Beefed up centerlink.

Time: 3 hours
Materials: 1/8” 4130 plate
Tools: swag brake, sledge, TIG, bandsaw, Ameribrade, AeroBlast sand blaster, 4.5 grinder, dynabrade air grinder with 1” drum sander
Beers: 5 Keystones
Appearance of tig welds on internet: 5/10
Appearance of tig welds IRL: 6/10
Penetration of tig welds: 9/10
Tig passes where it previously broke: 4, bitch
434B1460-370E-4DFB-824D-2FA2CEEA603F.jpeg

5C7088A3-9684-4B63-B23F-24691081728D.jpeg

09D63889-256F-460C-8C01-9E11BEC16FEE.jpeg

A1D9A26B-3117-43BA-B8ED-8E4B230BF012.jpeg

06C2ABB9-10C3-4A76-B8A2-D2E8B3044456.jpeg

7D3365EE-7AD9-40F2-A079-DB21245E4E91.jpeg

B6E6A48B-EA4C-4F1A-89CF-A29A3B6A38C7.jpeg

7ED5BB1C-BD11-4514-B8FE-77DFD6C3A6AA.jpeg

636058FA-26E6-48AD-8EC1-B94913AF437B.jpeg

73421C1A-AABB-4ABE-B13D-FBFA4D598DF2.jpeg


Edit: Pictures are all out of order. Fuck fuck fuck fuckity fuck. Figure it out, dickhead.
 
Feb 13, 2023
KOH

69 dirt miles at KOH. Truck works fucking awesome. Lots of whitetrashkyle fuckery. 10/10 would recommend avoiding Hammertown and the lakebed.

Lots of broken & lost shit(WTK left his toolbox open and lost my dezert jack, a significant spares package, tools, fluids, etc.) broken wheel, broken D44 front axle shaft, got stuck and I had to pull his 7600lb truck out with my 3900lb truck,

Gave a ride to a guy who has a gayass RZR1000 and the truck blew his fucking mind. He was wincing and bracing before the first few big hits, then realized we weren’t in a fucking dicksuck golf cart…

Passed a guy pulling a trailer thru 2.5’ whoops on Ghost rd who looked kinda angry when they passed us on the lake bed when we were drinking beer later. I blew him a kiss.

277DD3E6-C303-46EF-8A5B-D59704671FF1.jpeg

B3DF3658-2D04-424D-8E02-D1D956588FCF.jpeg

CAE3E78A-A789-4338-99E9-560CD0FE5178.jpeg

88A6B42C-26A5-49C3-9642-4B23D3C5C0D2.jpeg

64EF3EB8-F11E-46B2-BD4E-70A688CF3AA0.jpeg

E2769B79-BD35-4F99-AC22-1DC177E2C770.jpeg

0FA73659-6C68-44B0-9F68-9227481BE69D.jpeg

70470CC2-2E96-4962-800A-0C41C842A724.jpeg

34CE20E8-2833-4933-894C-83601DB5F7CC.jpeg

5C481108-EC06-491A-A7CC-E5A3F19D0931.jpeg
Love when golf cart guys ride in a proper built truck and realize how much better it is than their gayzer
 
Back
Top