The Turbo Glue Factory: Boosted Colt Build

[turbomonty]

Trans mounts and passenger engine mount pretty much done

 

[turbomonty]

I might have to get weird on the driver's side motor mount. There ain't shit for easy mounting. Only two 10mm on each side of the filter

 

[turbomonty]

These shocks are light weight!
I would not use off road. Lol

 

[turbomonty]

Drivers side motor mount done.
Soft side has 4x 10mm bolts into the block and the wheelie side has 3x 8mm bolts into the block
Perfect

with the semi rigid mounts, i am going to mount the alternator and possible the power steering pump to the frame and run the belt all over the fucking place

 

[Chancegoodman]

But why fram filter

 

[turbomonty]

home depot

 

[turbomonty]

oooooooooo

 

[turbomonty]

Neo Japan

 

[turbomonty]

 

[2012SVTSC]

Cool project! Love that body style gives me Escort vibes! The renderings are awesome

 

[turbomonty]

I can chop saw notch very good. For square tube I use the cnc mill....

 

[turbomonty]

Time to add some gussets and weld the cage all up. Once this is done the front tubes will lock the body on the tubes

 

[Turboyota]

Damn. You banged that cagework out quickly!

 

[turbomonty]

got a little more to go still but it did go kind of smoothly.
the A pillars where the only real trick. i surprised my self there and didn't fuck them all up.
even got most of the notch's tight.

 

[turbomonty]

Flipped this bitch over like King Kong
Super love car builds!
no over head welding for this guy here

 

[turbomonty]

Ok, all current cage is welded hot 100%

 

[turbomonty]

plan for the main hoop laterals. i need the bottom triangle to drop out for drivew shaft clearances

 

[turbomonty]

Axle build this weekend

 

[turbomonty]

Just need one more stick for the main hoop laterals! Dam

 

[turbomonty]

I might have found a long enough piece to do the lateral....