Random Projects

[SaltyMethods]

I built these custom Cock Cans for Turdbro since I owed him some.

Dick jokes aside, these are boner-rrific!!

 

[the bodj]

My kid is taking his sweet time popping out, so I’m hot rodding his radio flyer. It’ll be a push style like a stroller but with a steering wheel. He’s gonna get a little tikes steering wheel at the front of the tub to play with, and Im going to make 4 top fuel dragster style exhaust for each side. I’m most likely going to shorten the rack because I don’t have room for tie rods.

 

[84Prerunner]

Wrapping up another electrical system for a commercial application.

 

[WW_RANGER_X]

Baja Designs rock light kit installed on a friend’s Gen 1.

 

[84Prerunner]

Added reservoirs to the rear shocks on the wife’s 4Runner. Fox/radflo cluster fuck now because radflo wanted a kidney and my left nut for the parts to do the same.

 

[smokeysevin]

I'm still mostly moving into my new place despite actually moving in July of last year, but I got some work done on the electrical and lights this past weekend. No, the Tundra isn't running yet, AAA chase moved it.

I tossed some no/nc limit switches on the garage door rails to control the lights. Then I deleted the ratchet from some spent cord reels I had kicking around to connect the door to the light circuit in the ceiling, and wired up some lights on the garage doors so when the door is up, the lights on the rafters switch off, and the door lights kick on.



I'll post more details if anyone is interested, the wiring needs some cleanup but I'll do that when I get the garage door insulation started.

Sean

 

[84Prerunner]

Picked up a second gen tundra for the bigger cab. Been working on getting it outfitted for work duties. Sold my first gen 4hrs after posting it.

 

[BobbyHasARustyBronco]

I salvaged a mustang II front clip from another chassis and installed it with air bags on a friends 1950 chevy. I also installed a dual mastercylinder and modified the stock steering column to work with the new manual rack. I did the rear in like 2013. Hes giving it to his grandson and wanted it to lay flat.

 

[smokeysevin]

I did a big one yesterday.

It only took me 20 minutes to find the key, so I could change the bit, to drill the hole, so I could mount the key.

Sean

 

[Giant Geoff]

I broke my T-case and need a replacement if anyone has an 271F that will bolt to a 4r100 tranny? Making a Dana 60 TTB for the red truck and made a master relocator for better shock placement.

 

[the bodj]

I broke my T-case

Boy did you ever!

 

[smokeysevin]

I made some fold up attic joist cabinets the other day and finally got one of the drives built. The proof of concept works pretty well, I want to get a better drive gearbox but for a bunch of cheap garage door parts, some bearing pillow blocks, and an awning roller, it holds enough to get my woodworking stuff out of the way. I really need to get some kind of safety catch though because standing under or near it sketches me the hell out even knowing I can hang off the shelf and I am like ~1 Bodj +/- 1/2 Bodj in weight.

Sean

 

[Cleandezert]

I made some fold up attic joist cabinets the other day and finally got one of the drives built. The proof of concept works pretty well, I want to get a better drive gearbox but for a bunch of cheap garage door parts, some bearing pillow blocks, and an awning roller, it holds enough to get my woodworking stuff out of the way. I really need to get some kind of safety catch though because standing under or near it sketches me the hell out even knowing I can hang off the shelf and I am like ~1 Bodj +/- 1/2 Bodj in weight.

Sean

okay now that is cool

 

[smokeysevin]

okay now that is cool

Thanks, I have another setup I am working on that uses the same basic parts but will lift the 27 gallon black and yellow storage totes. That one is gonna take a little longer though.

Sean

 

[96f-u250]

I broke my T-case and need a replacement if anyone has an 271F that will bolt to a 4r100 tranny? Making a Dana 60 TTB for the red truck and made a master relocator for better shock placement.

What application is the brake master relocation for, and have you decided on a retail price? Thanks!

 

[bonch]

Drug this project out of the yard. Finally got some used parts for it. Been sitting for 15 years.


Got some used Deaver's to throw on.

 

[84Prerunner]

Tundra getting more love. This thing sags really bad with the shell and work supplies.