I've had this truck for awhile now, it's a Curry build from early 00's. I've been reworking it with the help of some friends. I'll post a few original build pics. The truck was in rough condition when I got it, dash wiring was all cut/crimp connected back. Had a flicker so started pulling interior to chase it down. Once tearing into it I found that parts of the chassis weren't fully welded. Lifted the carpet and a seat tube was terminated into the sheet metal, held with a tack. At that point I needed to see what else was going on, so I cut some of the body panels off. There was alot of things that needed addressing. Between then and now its been 8 years, slowly going as I could afford and the truck is nearing finished. Here's some pics of the original build and current, the cab cage only had a vertical b pillar tube, I added the other tubes. And unfortunately don't have many pics of when it was first built.