Chop Shop Builds

[UR_Mawm69]

just so that i can have a quick reference, i'll put these links here....


https://www.therangerstation.com/forums/index.php?threads/hydroboost-swap-into-93-ranger.164718/


https://www.therangerstation.com/forums/index.php?threads/hydroboost.154675/


https://www.powerbrakeservice.net/fof1andf1hyk.html


https://www.fullsizebronco.com/threads/hydro-boost-conversion-questions.527379/


https://www.therangerstation.com/tech/ford-hydro-boost-conversion/#gsc.tab=0

 

[UR_Mawm69]

Got SOME cleanup work done today..... not much. But aa little bit is better than nothing.....

 

[Tree trunk]

Looks like too much work…. Just sell it and buy a rzr

 

[cbrewer22]

Sick as f*@k!

 

[UR_Mawm69]

no real visible updates, but just spent a buuuuuuuunch of time with the flap disc and wire wheel just now....................
youd probably get the idea if i took a ppicture of the floor of my shower just now. i might of clogged the shower drain with all the metal that cam off my body from grinding shit............... (and u_r m_a_W_m's you know what)

 

[the bodj]

gonna put some beams on there that aren’t 8ft wide?

 

[UR_Mawm69]

gonna put some beams on there that aren’t 8ft wide?

 

[UR_Mawm69]

absolutely no updates but i've been getting a wee bit faster/better at my S.W. drawings.
This is just based off rough measurements/drawings. but, little is better than nothing!

...............PLUS, i jsut wanted to be a KoolKid and post a screenshot of my S.W. drawing in my thread. hahaha

 

[UR_Mawm69]

update.. added washers. heheh

 

[UR_Mawm69]

no real update pics again........ samesame grinding frame cleanup shit.
im done with cleaning the frame up, i think.
not Marcellica status........... but, i can only hope to get to his clean as fuck status one day. @marcytech

and my shower floor after.........

and my handsome as fuck self.............

 

[UR_Mawm69]

now to ram these cardboard cut outs into a compooper screen.........

anyone see anything wrong with doing this? i was just gonna do it out of 1/8" HR or whatever we have at the shop/work.

im not planning on cutting any speed holes in it to weld the inner spots to the frame sincde there's already about 69k holes in the frame. ill just weld the plate to those holes from the inside of the frame.

and yes, i know. im not going to just go HAM and weld everything in one sitting. weld a little, let it cool for a few hours - maybe even a day, then weld more, then bang m_a_w_m_a_c_i_t_a_s, and so on.

 

[UR_Mawm69]

step uno............... i hope. printing another copy of what i drew to scale, to set against frame and see where i fucked up.

 

[Cleandezert]

what a total pain in the balls. This makes me love that i dont work on offroad trucks anymore. lol

Looking good though for a retard.

 

[UR_Mawm69]

what a total pain in the balls. This makes me love that i dont work on offroad trucks anymore. lol

Looking good though for a retard.

rAtard**********

 

[UR_Mawm69]

you guys think i should plate over the factory crossmember at all??




i feel like that'd be way too much, now that i have a visual............

 

[Fenix Motorsports]

you guys think i should plate over the factory crossmember at all??

eh, probably not, design the engine cage properly and that should be more than enough, I don't think I've ever seen anyone plate a factory x-member anyway.

 

[the bodj]

Yes you should. I've seen them crack where the beam mounts go.

 

[UR_Mawm69]

Yes you should. I've seen them crack where the beam mounts go

yeah...... especially because these are added equal length beam brackets built by who fucking knows. but if it goes along with the other fab on this shitbox, i shouldnt trust it. hahah

 

[Fenix Motorsports]

Yes you should. I've seen them crack where the beam mounts go.

Shows how much I know about the ford/beamed stuff lol, not my cup of tea.