92 Toyota Pickup

[FasterNU]

Noodled it pretty good... RF and LR took some big hits for sure!

 

[YotaTyler418]

And so it begins

 

[YotaTyler418]

Welp… that escalated quickly

 

[desert_steve]

Time for beams and an LS?

 

[YotaTyler418]

Time for beams and an LS?

Time for beams and an LS?

Beams and 22re

 

[YotaTyler418]

Front end of choice for this little Toyota are 1in king pins off a 74 f-350. @ricky.vazquez killed it on burning the uniball cups in.

 

[Twisted Sid]

So if going beams, is the old steering up for grabs again?
I also have a buddy who's possibly interested in your old front end parts, if you want to get rid of them

 

[YotaTyler418]

So if going beams, is the old steering up for grabs again?
I also have a buddy who's possibly interested in your old front end parts, if you want to get rid of them

A friend bought everything to fix and put on his truck

 

[YotaTyler418]

Slowly been chipping away on the king pins. Got beams cut and turned and had Jesse and Mikey at the @the_fablab_ machine these sweet bronze bushings for my spindles

 

[Giant Geoff]

Slowly been chipping away on the king pins. Got beams cut and turned and had Jesse and Mikey at the @the_fablab_ machine these sweet bronze bushings for my spindles
View attachment 37897

Very cool! Everything‘s looking good. When I cut the beam to get more right height out of the kingpin beams, I would cut them inside of the radius arm mounting hole to straighten out the discrepancy of the beam shape but outside works just make sure you keep a 1/2-3/8 gap so you can fill it from the center out doing multiple passes so you have full penetration from the center all the way out and not just weld it on the outside or it will break off.

 

[ricky.vazquez]

 

[YotaTyler418]

Beams and radius arms are wrapped up, time to figure out steering. Thanks @ricky.vazquez for tig welding the king pins