Uncle Eddie bronco build

Well picked up some king 2.5x12’s for the front today. New used for mock up then the truck was parted out. $1000 for the pair. Ordered for a f150 so valving should be close
IMG_2579.jpeg
 
Last edited:
Can’t wait to get this thing done. My dad’s Bronco is almost ready just ordered springs last night then mine gets to go on the hoist and not come off till it’s done. Last night I finished setting up my gears in the new third member. 5.13 and a 35 spline spool. Also started to tin the dash in
IMG_2595.jpeg
IMG_2607.jpegIMG_2597.jpeg
 
Picking away more and more tied the engine cage to the main cage, needs more yet but it’s a good start.
IMG_2696.jpegIMG_2695.jpeg
My boy loves helping he helped my with the dash panels and notching tubes. Even tacked some parts together for my dads Bronco
IMG_2700.jpegIMG_2693.jpegIMG_2689.jpeg

Turned the ID on some rotors to fit over the rear hub.
IMG_2628.jpeg
Tacked a trans mount in IMG_2659.jpeg
Pot miss you headlights in and made a skid plate for the front bumperIMG_2683.jpeg
 
Started skinning the dash and council the main dash and council top are all 1 piece.
IMG_2810.jpeg
Took a half day at work Monday and Spent the day welding. Finished all the inside cage welding and shock mounts. Still have to finish weld the rear seat mounts but that’s a quick job. Built my rear bumper
IMG_2806.jpeg
Built my 3” y pipe
IMG_2795.jpegIMG_2796.jpeg
Built a custom steering column.
IMG_2771.jpegIMG_2770.jpegIMG_2729.jpeg
Put a few things on my center council
IMG_2630.jpeg
My boy helped me tin the top of the dash.

IMG_2700.jpeg
 
LOVE IT.


Buuuuuuuuuuuut, if you ever/when you need to fuck with wires and shit behind the dash............ its going to be a pain since you have to take the whole dash panel AND the center console off. Especially if you have a bunch of switches/random shit plugged into the center console area. plus, you'll have to move your beer to an UNstable spot. which COULD be a MAJOR FAIL, in my opinion.........

OTHERWISE, KEEP ON KEEPING ON! LOOKS TITS!
 
UR_Mawm69 said:
LOVE IT.


Buuuuuuuuuuuut, if you ever/when you need to fuck with wires and shit behind the dash............ its going to be a pain since you have to take the whole dash panel AND the center console off. Especially if you have a bunch of switches/random shit plugged into the center console area. plus, you'll have to move your beer to an UNstable spot. which COULD be a MAJOR FAIL, in my opinion.........

OTHERWISE, KEEP ON KEEPING ON! LOOKS TITS!
Click to expand...
Well all my wires are under the middle on the firewall, Switch pro controls everything. So only wiring under the council will be the window switches and battery cut off. Gage panel will be hooked in to the obd port so no wires there. Side panels will be removable if I need access
 
Cgiles01 said:
Well all my wires are under the middle on the firewall, Switch pro controls everything. So only wiring under the council will be the window switches and battery cut off. Gage panel will be hooked in to the obd port so no wires there. Side panels will be removable if I need access
Click to expand...

right on, you got it figured out!



only thing i still have to point out is..................

center CONSOLE, not council. we're not in court here. hahahh
 
You must log in or register to reply here.

Similar threads

nvwiggins
1994 Desert Copper Bronco
Replies
7
Views
388
nvwiggins
nvwiggins
A
PILE oh shit bronco 86
Replies
12
Views
437
Austen2019
A
Bradkt
Brittney the Bronco
Replies
15
Views
636
LPR_Bronco
L
Cgiles01
1968 Bronco prerunner build
Replies
11
Views
550
Cgiles01
Cgiles01
N
1994 Explorer Family Adventure Maker
2 3
Replies
43
Views
2K
marcytech
marcytech
Back
Top