Baconcreekmetal's latest activity
-
BBaconcreekmetal reacted to Hambone's post in the thread Not much left Tacoma left... 4500 koh build with
Like.
Got the driver seat mounts in and adjusted the passenger a little more. Started making the harness bar till the hole saw stripped out on... -
BBaconcreekmetal reacted to Hambone's post in the thread Not much left Tacoma left... 4500 koh build with Like.
Seat mounts have been kicking my ass. Sadly this took me two days and still not done. Trying to find something functional, looks good...
-
BPic1 So researching these old school radius arms I came across guys that aren't happy with the flex do this wristed radius arm on one...
-
BWell finger is healing. Basically a callous on the end so I'm not 100 healed but it's not slowing me down much anymore. So back on the...
-
BBeams and rad arms off. Got impatient and realized I had to jack the trans up, dismount that, and have it sitting on jackstands as...
-
BI WORKED ON IT LAST NIGHT!!!!!!!!!!!!! I'd say the frame is about 96% prepped. next up, remove the beams/rad arms/brake lines and...
-
Byesterday, my friends son came over to help again. i told him id show him how to weld since he's never done it. so i had him bild this...
-
BThe plan is to add material to the back of the sharp areas so we can block sand it to flow again. I like this a lot better than the TT...
-
BCutting it multiple times across to get a gradual flare ended up making the top flare up as well making a TT look so we ditched that...
-
BTime to make the upper truss hopefully it gets warm soon.
-
BAlso with the bumps close to the narrow ford frames when you check for tire clearance articulate the axle with 1 at bump and other side...
-
BYes I did. Also why everything is only tacked on.
-
BSpent a day last week and got the axle back brace all welded on still waiting on tips for my plasma cutter for the upper truss and upper...
-
Byou might need this Mustang master. It has 3 ports on it. One port for each front wheel and then one port for the rear to share. The...