Yeti The Bronco

[Raceranger97]

No, I’d buy a designated crawler before I went that far with this thing.

have you put a deposit down for portals yet?

 

[Raceranger97]

Did more wheeling last weekend. Wife drove the whole trail herself since I was busy spotting others.

 

[mobil1syn]

Did more wheeling last weekend. Wife drove the whole trail herself since I was busy spotting others.

less spotting needed with all the clearance the fancy portals give you, just sayin

 

[Raceranger97]

less spotting needed with all the clearance the fancy portals give you, just sayin

View attachment 14538

Was spotting a stock 4Runner in the group. But ya I get it.

 

[mobil1syn]

Was spotting a stock 4Runner in the group. But ya I get it.

ooh they got em for those to

 

[GahnRacing]

@mobil1syn Do you have some sort of discount code for the things? If not @Raceranger97 is gonna have to sell his butthole for a set.

 

[Raceranger97]

@mobil1syn Do you have some sort of discount code for the things? If not @Raceranger97 is gonna have to sell his butthole for a set.

gross

 

[Raceranger97]

Added some more protection to the bottom of this thing.

 

[the bodj]

What material are those made out of? I'm going to be making skids for a buddy's 2024 Colorado and figured 1/4" for under the motor and 3/16" for the rest. Also, how is the tail end supported around the gas tank?

 

[Raceranger97]

What material are those made out of? I'm going to be making skids for a buddy's 2024 Colorado and figured 1/4" for under the motor and 3/16" for the rest. Also, how is the tail end supported around the gas tank?

Fuel skid is 1/4” aluminum. It replaces the OEM straps with heavy duty brackets. Hard to see in the pic but it bolts to one really close to the rear of the tank.

 

[the bodj]

Fuel skid is 1/4” aluminum. It replaces the OEM straps with heavy duty brackets. Hard to see in the pic but it bolts to one really close to the rear of the tank.

You weren't joking. Those brackets are beef! Are they machined or welded together?

 

[Raceranger97]

You weren't joking. Those brackets are beef! Are they machined or welded together?

They are welded together.

 

[Raceranger97]

Ran around Pismo Dunes recently. Drove it harder than I should have and it held up fine.

 

[Raceranger97]

Did a new trail yesterday. Spanish Lake OHV way above Wishon. I knew it was high elevation but was still surprised to see so much snow. We hiked a few miles at the top and ran into these fresh big bear tracks several times.

 

[Raceranger97]

Red Lake trail. Took all the hard lines and Bronco did great.

 

[Raceranger97]

Definitely used the skid plates

 

[2012SVTSC]

You are putting that bronco to work!

 

[Raceranger97]

You are putting that bronco to work!

It definitely sees more than the mall lol.

 

[Raceranger97]

Been doing some mild trail runs lately but currently most of the trails are closed. Added some ditch lights though.

 

[Raceranger97]

Some snow wheeling shots from last weekend.