V8 Solid Axle Ranger

Switched from a 6 button thingy to an 8 button thingy, also put a switch in the dash to give the panel power so I don’t have to have the ignition on to use it. Much better. IMG_0356.webp

Also, am I trippin or does KMC really not offer these in a 17” Superduty pattern? Now idk what wheel to get.

IMG_0372.webp
 

Attachments

  • IMG_0372.webp
    IMG_0372.webp
    97.8 KB · Views: 2
My switch panel is on a aux switch as well. Do you find that when you turn the switch on before firing up the engine it drops the voltage low enough to shut the switch panel off momentarily?

I tried setting up a start switch off one of the buttons but the voltage drop was too much to where it would keep resetting and wouldn’t crank continuously.
 
Back
Top