The Turbo Glue Factory: Boosted Colt Build

[turbomonty]

LCA

 

[turbomonty]

planning on running the front of the lca way forward like in red. this will clear all my frame shit on both sides
then the coil over will be on the blue tabs facing rearward

 

[turbomonty]

passenger side

 

[turbomonty]

So I can't read and bought one way fucking needle bearings! I never imagined they even make them but sure enough. Standard ones ordered and the new cams or what ever works great

 

[turbomonty]

Cut them out of an old 4140 flat bar , band saw them loose and then plained them down

 

[turbomonty]

Fixture this mess up

 

[turbomonty]

After some megawatts of power

 

[turbomonty]

Just need to add in the little fillet piece tomorrow

 

[turbomonty]

finally got my CNC lathe up and running. made some rod end threaded bushings for the control arms.
i made some over size ones and back bored them for race car function. also took some basic bitch tabs and made them race car too with some .075" deep pattern

 

[turbomonty]

took a piece of 2" tube to fixture up the tabs all nice and straight like.... probably
i am liking to tig weld these up as you know that shits melted together, very quite and no dam berries all over the fucking place!

 

[turbomonty]

For speed

 

[turbomonty]

Gen 1 Toyota 4*4 steering box is just right
Now I can power through the Starbucks parking lot with authority