For Sale Ford ranger, Engine cage, radius arms, shocks, ect.

ricky.vazquez

New member
Joined
Feb 3, 2023
Messages
13
Off a 1992 rolled ranger. Roll over at 10 mph. Front end was on the truck less than 2 years. It was build on a Dana 35 beams stock width and instead of cutting and Turning we used the stx drop brackets. Got 16” of travel with 4x4. Everything was cut off using a torch saving all the Fabraction work. Will be cleaned up almost ready to weld on your build. Comes with everything you need for coilovers on the front of your ranger. Not my truck selling for a customer. I could install this on your ranger for extra cash.

Call or text 805-746-5367 if interested

Fillmore Ca

Engine cage for 12” coilovers Ford ranger -$800 obo
Radius arms- $500
Radius arm brackets and trans cross member-$350
Fox 2.5 12” rebuild, revalved for ranger- $1300
Front bumper- $300
Relocation for air filter With filters-$100


483C17BD-F9E8-49AB-AEF8-55AF71DCAEC0.jpegC4EBC8FC-B7E5-4CE7-BD17-0A0BFC76B56A.jpegA4EE1F00-150D-4956-8B3D-27583E874A2C.jpeg0922D9D5-1DAC-42E4-81C5-06937910F243.jpeg6DD25C8C-9C6C-4660-B895-954F0F24A3A9.jpeg10EC6E2D-2C03-478A-A15F-D7FFD5B55B25.jpeg86BC02D3-72AF-4230-8E47-C0DD60E81884.jpegDCF2514D-3CA4-46FE-B2B8-32C45918CD64.jpeg8413E372-5398-42A8-9289-1D5BAAE7F511.jpeg
 
Cool little truck? What happened on the roll? are you building something new ?
Not my truck. Something I build for a friend. Lost power on an uphill climb and rolled backwards into a g out. Ya I’m going to build his 2016 Silverado now. Maybe 1” king pins 🤘🏼 my truck is a 1992 f150
 

Attachments

  • 1EE0AD85-1E0F-4EB7-A28E-48CC0335F8F6.jpeg
    1EE0AD85-1E0F-4EB7-A28E-48CC0335F8F6.jpeg
    161.9 KB · Views: 25
Back
Top