Chop Shop Builds

[96f-u250]

LOOKS LIKE YOURE WAITING ON A M4WM TO SPRAY YOU DOWN WITH THE HOSE. LOL

 

[UR_Mawm69]

LOOKS LIKE YOURE WAITING ON A M4WM TO SPRAY YOU DOWN WITH THE HOSE. LOL

i was wating for YOUR MOTHER to get there, actually...........

ALL CLEANED UP NOW THANKS TO your mamacita!

 

[LoganB]

Weld those gouges up and try again.

 

[UR_Mawm69]

Weld those gouges up and try again.

thats what i'll do............
















maybe,,,,,,,,,,,,,,,,,,










probably.




IF the new rad arm brackets don't cover it. hahaha

 

[UR_Mawm69]

1. Moved the motor.

2. TRIED to get it set IN the engine bay with my little complaining and whining 9 year old son who gets tired as fuck after pushing the motor to the side 3 or 4 times...... then HAS to go sit inside and eat something, but not actually eat anything, just go inside.
Hah

3. Set the motor back down in front of the truck.


Little progress is still progress, right?!?!?

 

[UR_Mawm69]

3 trys............ its in the GENERAL AREA of where it needs to go.

 

[UR_Mawm69]

Ranger is still sitting exactly as last picture shows..........

 

[UR_Mawm69]

oh oh oh.

and i have a new excuse for the PussyGetter sitting now.
Plasma machine at work took a shit, so we're waiting for the new one to get hooked up and shit........

im too pretentious (correct word??) to cut shit out by hand with a grinder now.

 

[Baconcreekmetal]

I have a cnc table, I understand.

 

[UR_Mawm69]

Picked up a PCI intercom for the buggy at the offroad expo last weekend. Papa was finally sick of the fucking bullshit Rugged Radios intercom that was so intermittent with working every time we used it. Pretty much just a plug and play. Were gonna cut a plate out to fill some of the old holes, but thats all we have to do.



And the biggest update!!!!
The PussyGetter!!!


Still getting no poonanny and sitting. No fucking drive to start measuring/drawing the motor mounts plates since we aint got no plasma table, still......

Wtf Elliotsters & WallyBoy, still can't upload pics?!?!?

 

[turbomonty]

Ya pics are tough these days

 

[UR_Mawm69]

works now.........

 

[UR_Mawm69]

P
L
A
N
S

are to start on the motor mounts this weekend. Brogs is with momma & boytoy at the dunes this weekend, so no Brogan i gotta worry about. i have no excuse to not cut the plates out by hand with a fucking grinder, other than im a babybackbitch. which i might end up being. who knows.
grinding dust & sparks are so ickyyyyyyyyyyy.

 

[UR_Mawm69]

Most of my free time today, which wasn't much, I got a bunch of pre made tabs, big enough to trim down to whatever size i needsince im out a plasmacam, and x3 bushing kits from SDHQ, go the motor mount bolts figured after 2 trips to Ace, got the Chop Shop cleaned up a bit, and basically spent all day running to and from places to get shit.

 

[UR_Mawm69]

Welp. I've figured it out now period the chop shop hates me for neglecting it for so many years, and not working on shit in it forever. It has been giving me nothing but problem after problem, after little problem, after big problem, after medium problem. And all over again, clearly it's clearly out for revenge on me. Ive been in the chop chop for few hours 2 days, back to back, each and it has gained me drilling out 2 tabs 1/16" bigger DIA and the start of threading 4 bolts into the block. That was about 50 trips to Ace Hardware, 1 trip to SDHQ, which is a good 25min drive one way, and a lot of new curse words made up.


Fuckme. ChopShop dont love me nomoooo.


Ill get back in the rythm one of these days.......

 

[the bodj]

Not to poop in your Cheerios, but try making the tab larger than the diameter of the bushing to extend bushing life

 

[UR_Mawm69]

Not to poop in your Cheerios, but try making the tab larger than the diameter of the bushing to extend bushing life

Unfortunately, I knew and know that but I didn't cut these out or make them myself. Had to work with whatever tabs that the shop had.