2Ghetto The Rusty Trombone

Top mount (Tab will be attached to b-pillar)

CgQdMBZN_o.jpg


Bottom mount.

NsuKPKYu_o.jpg
 
still working on the boom.... bondo on all the brad nails holes except the back panel.. and raptor lined them at JustN's and drove home with them in the back of Lezbaru and got high off fumes.

Lki5gSSS_o.jpg


All mounts done... waited to weld in the tops till after raptor lining because I learned last time the thickness will make your holes slightly off on brackets. Boxes fully done, so wiring it all now.

pTYkjvkx_o.jpg
 
Last edited:
On Sunday I assembled the speakers in box, welded tabs, painted it all.

Then got amp mounted and made my own 10gauge to 12 gauge bridged speaker wires so they are in parallel.... This will give 400 Watts of bass in mono to both 10" woofers at 4ohms (2x 8ohm woofers in parallel is 4 ohms). Woofers are rated at 300W, so this should all work good.

And today at lunch I got bulkhead installed, and main amp power and ground ready to crimp (need to get hydraulic crimper from my brother).

All that is left is the wakeup wire from head unit, plug in RCA wire to subwoofer outputs, and I have to re-do main power line from battery switch so it comes and goes from this bulkhead. God damn... what does someone charge for a custom stereo like this!!? I have quite a bit of time in it. G3 and G4 stereo's kick ass... so it should be worth it, but at this point, I can't wait to hear it.

kjFCHlAj_o.jpg
 
Last edited:
Back
Top