Turboyota's latest activity
-
Swapped in a blue top steering box with a Mountain Vista Fab brace this weekend. HUGE improvement to the steering. Stoked to finally... -
With less rods, there is less drag on the pump so it steers faster and without swingers limiting, the amount of steering you can steer...
-
Turboyota reacted to turbomonty's post in the thread The Turbo Glue Factory: Boosted Colt Build with
Like.
Not terrible I think I'll machine up the external shape die to smack on there to tighten it up some -
Great race!!! Pitted the McMillins with a couple minutes separation. I was told the pit stop were both under 35 seconds for two tires...
-
Do your shoes quack too is back on the interwebz?
-
Outside Yuma yesterday
-
Turboyota reacted to turbomonty's post in the thread The Turbo Glue Factory: Boosted Colt Build with Like.
I think I am going to make a dolly to form the lip of the lower part of this monster Like a 3/4" radius imagine how solid this will be...
-
Mill’s forward and reverse switch decided to die while I was using it to tap……worse possible time. Got that swapped out with one on...
-
Here is an old one from 2008. Hit a square ditch that folded the radius arm and all the cross over steering! We fixed the radius arms...
-
Haha well I got the truck from an awesome old lady and her late husband had about 6 tires and wheels that I took to get rid of for her...
-
Hey! I am starting another project, I know, I've been struggling to work on my other project but hey here I am! Anyway this time I...
-
Turboyota replied to the thread 1973 F250 Prerunner Project.I hope you find 3 more Super Swampers
-
Turboyota reacted to Hambone's post in the thread Local Legend Not much left Tacoma left... 4500 koh build with Like.
It seems like the small tabs and brackets never end. Screwed with the carrier bearing all day yesterday. Ended up having to make a front...
-
Modernized this hoopty a bit since I've been driving it around town a lot.
-
Turboyota reacted to turbomonty's post in the thread The Turbo Glue Factory: Boosted Colt Build with Like.
Got it mostly together today I'll pull it off tomorrow and flatten up some areas with a straight edge clamped on and then finish weld...
