Klever's latest activity
-
Well it’s been a while but she’s got a new 3rd brake light and antenna now. Gonna mount the radio in the center console. Need to figure... -
Klever reacted to Tahoe_Prerunner's post in the thread 2008 Chevy Tahoe Prerunner/Prelander Build with
Like.
Update on the build: -Top of cage and rockers tube are full welded and pillars are ready to be tacked. -Stepped up to monster 40”... -
Beams hung, steering cooler mounted, swingers mounted, and swinger tie rods set at zero position. Slowly moving forward.
-
Thank you! It was certainly a learning process, a buddy of mine had built a similar swing steer so I copied his design a bit, I got...
-
This has been an on-going spotting with a truck near my neighborhood. I saw a clean, stock, 1st gen Explorer driving home from work and...
-
Klever reacted to Camper shell fun's post in the thread Toyota Pickup (old Koenig racing truck) with Like.
Also a side note, I don't know what hubs Mike used, but if you want to make the truck a little narrower you can use Toyota straight axle...
-
Rear is almost back enclosed. Exhaust is ran all the way out the back. My boy has been helping do it all.
-
I've seen much worse from grown men haha
-
My son has been bugging me to do some welding so I set him up and let him weld the inner fender in. They look decent for a 11 year old
-
I was finally able to get this on the hoist Did some exhaust work And started closing off the inner fenders Also got the front...
-
Not too much of an update but got the wheels polished and cruised the truck yesterday! Did 37 miles. Been enjoying logging some street...
-
Pumped on these little XL80 mounts.
-
Ruined the passenger side bedside so we moved to other loose ends for now. New fill neck to clear the front bypass.
-
Had a blast at Mitch’s annual party. Launched tf out of the truck. Should have turned the tubes in. Went to flat and blew a wheel apart...
-
I'm fairly new to the Bay Area. I picked up a F-350 with all the accoutrements a few years ago in Colorado. It looked great, but it...
