THE NUCLEAR UNICORN

Update: Not too much going on, Built some -10 PushLock heater hoses!
I'm currently on the lookout for an NP241 32 spline driver drop transferase. If anyone has one, or know of a good place to grab one, please keep me posted. Thanks!
 

Attachments

  • IMG_6471.webp
    IMG_6471.webp
    158.2 KB · Views: 41
  • IMG_6472.webp
    IMG_6472.webp
    117.5 KB · Views: 28
  • IMG_6473.webp
    IMG_6473.webp
    129.3 KB · Views: 27
  • IMG_6474.webp
    IMG_6474.webp
    189.1 KB · Views: 34
Weekend update: Built some dash access panels to make things a little easier to work on once its all back together. I'm in the process of building a panel for the center of the dash and the center console. I also got the Jamar Performance brake pedal assembly and Vintage air unit installed and mounted into their forever home. Ordered a transfer case too! I should be able to get the 4L80 in place anytime now!
 

Attachments

  • IMG_6550.webp
    IMG_6550.webp
    54.7 KB · Views: 14
  • IMG_6549.webp
    IMG_6549.webp
    54.3 KB · Views: 14
  • IMG_6548.webp
    IMG_6548.webp
    33.1 KB · Views: 14
  • IMG_6545.webp
    IMG_6545.webp
    98.9 KB · Views: 12
  • IMG_6544.webp
    IMG_6544.webp
    93.9 KB · Views: 12
  • IMG_6543.webp
    IMG_6543.webp
    118.3 KB · Views: 10
  • IMG_6551.webp
    IMG_6551.webp
    52.8 KB · Views: 9
  • IMG_6552.webp
    IMG_6552.webp
    103.3 KB · Views: 9
  • IMG_6553.webp
    IMG_6553.webp
    146.2 KB · Views: 10
  • IMG_6547.webp
    IMG_6547.webp
    61.9 KB · Views: 16
A few more weekend updates.. Installed the new valve covers and added some flare to the center console panel. I'm going to start on the driver side panel this weekend.
Hey on the pic with your air filter what you going to do about the water going directly into the air filter. I only ask because I have the same set up and the 14s don’t fit but I did find this set up for under 100 bucks and the filter is off the shelf at autozone for 12$
 

Attachments

  • IMG_7465.webp
    IMG_7465.webp
    2.1 MB · Views: 15
Hey on the pic with your air filter what you going to do about the water going directly into the air filter. I only ask because I have the same set up and the 14s don’t fit but I did find this set up for under 100 bucks and the filter is off the shelf at autozone for 12$
There's a provision plate that covers said area to keep water diverted from the air filter. Chances of any water getting into the air filter without it are pretty slim, due to the valance air ducting holes being so small. A ton of water would have to flow through there in order to get into the filter.
 
There's a provision plate that covers said area to keep water diverted from the air filter. Chances of any water getting into the air filter without it are pretty slim, due to the valance air ducting holes being so small. A ton of water would have to flow through there in order to get into the filter.
Oh gotchya
 
Back
Top