Raptor 2.5 valveing?

[stokes.760]

Looking for stock valveing on the 2.5 raptor rears. Or valveing that people have done that works. The bump zone is way stiff and need to lighten it up.

 

[DialedShockPrep]

What is the application?

 

[stokes.760]

What is the application?

2001 4 door explorer rear

 

[2012SVTSC]

This is what I measured as stock valving for a 2 door rear shock, you can round the OD, that was just the read out form the micrometer. The .08 is really .008

 

[stokes.760]

This is what I measured as stock valving for a 2 door rear shock, you can round the OD, that was just the read out form the micrometer. The .08 is really .008
View attachment 49482

Do you have the side stack?

 

[2012SVTSC]

Do you have the side stack?

I dont, these are really old notes, so its all I have.

 

[stokes.760]

I dont, these are really old notes, so its all I have.

Ok thanks gives me an idea of where I want to start with the "main" stack

 

[stokes.760]

What is the application?

Im sure you have the secret sause. But if you can let me know what the factory side stack is i can avoid the down time of opening up and ordering parts. Truck is my daily driver.

 

[DialedShockPrep]

If it’s factory valving, it’s a #90 on compression with the largest shim tripled, and the next size down doubled.
Rebound is a #50 stack

 

[troysladeck]