PICTAFIEDESIGN F150 Luxury Centermount Build

Some shit. Not a lot of shit. Got the fuel lines and trans lines all done. Need to run oil lines to engine now. Also got the brake reservoirs in finally. Connected the Holley harness but didn’t take pics because no one wants to see that shit. Waiting on the ID Designs front accessory kit to come in and should be connecting plumbing and everything for start up! 🤘🏼🤘🏼🤘🏼IMG_1991.jpegIMG_2014.jpeg
 

Attachments

  • IMG_1989.jpeg
    IMG_1989.jpeg
    670.3 KB · Views: 6
Very niiice. DId you leave some room in between those switch pros? the face plate will take up some space around perimeter....

Oh, and i wonder if your fancy restomod AC knobs will stay on. MIne are currently sitting on my shelf after TerraCrew roller "whoops" shot them off. haha.

Thanks for reminding me. I need to go get those put on. Gonna be a bitch, because I think I have to reach up behind dash and take them out
 
FasterNU said:
Very niiice. DId you leave some room in between those switch pros? the face plate will take up some space around perimeter....

Oh, and i wonder if your fancy restomod AC knobs will stay on. MIne are currently sitting on my shelf after TerraCrew roller "whoops" shot them off. haha.

Thanks for reminding me. I need to go get those put on. Gonna be a bitch, because I think I have to reach up behind dash and take them out
Click to expand...
I’m not running the face plates. I don’t like the way they look to be honest. Running them without it matches the other screens better too.

Hopefully they don’t have that issue lmao! This fucker should be pretty damn smooth.

Yeah they’re not the easiest things to put on or take off without unmounting the dash from the truck. Lmao
 
Might be worth your time to make sure the set screws are at least tight? (I dont know how tight mine were from factory) I am going to check the last one hanging on. I might sharpen the end of set screws to try to get them to bite too.

To be fair, I never had problems on natural terrain. But trying to go as fast I could in the rollers was pretty rough. And why do they call them rollers anyway... aint nobody rolling them!! LOL
 
FasterNU said:
Might be worth your time to make sure the set screws are at least tight? (I dont know how tight mine were from factory) I am going to check the last one hanging on. I might sharpen the end of set screws to try to get them to bite too.

To be fair, I never had problems on natural terrain. But trying to go as fast I could in the rollers was pretty rough. And why do they call them rollers anyway... aint nobody rolling them!! LOL
Click to expand...
Oh yeah I’ll take a look for sure. Mine will have about a 15 degree angle facing up when they’re in car. Might help the load not sure if yours were straight up and down or not.

Yeah those damn things weren’t rollers from what I saw lol. Looked brutal
 
Pictafiedesign said:
Thanks man! Yeah I try to update over there but, nothing seems to get traction at all lol. I can't post over there everyday to get the interactions needed
Click to expand...
just text me the updates. ill get you all the information you'll ever need

281 - three three OH - 8 zero zero foooooo, hit Jakey up on the low because back den these hoes didnt want me, now they all up on me.



(if anyone gets that joke, say your mother. if not fuq u)
 
You must log in or register to reply here.

Similar threads

jackbeaugureau
94 OBS F150 build
2
Replies
26
Views
2K
jackbeaugureau
jackbeaugureau
S
98 Ford ranger backyard build
Replies
2
Views
287
shane649
S
G
Crew Cab GTS build “White Privilege”
Replies
15
Views
756
marcytech
marcytech
AJones
Sold 2003 Ranger
Replies
9
Views
836
AJones
AJones
G
GTS CUSTOMS IS HIRING!
Replies
0
Views
140
Gtscustoms
G
Back
Top