Local Legend Mai-Tai-Yota

Motiracer38

Well-known member
Joined
Apr 27, 2022
Messages
257
The story of this truck begins as all good ones do with the death of my last one. Clean-Dezert 2011 I thought I had my 5 lug Tacoma sorted out enough to venture further out and hang with some DR OGs and meet up with a group that would grow to become the DMC. I showed up in time to see Mikey grenade his transmission off the ant hill and a random bro roll his truck on the road the Del Taco. I knew I had found my kind and proceeded to rip the front corner off my truck giving 84Andrew a ride. I hitched a ride in the back of Kellan's tin top Samurai to grab my trailer and had plenty of time to devise a plan to finally rid myself of the problematic Tacoma.
IMG_20101113_141020.jpg

Once home I quickly parted out the truck and went shopping for the perfect base vehicle to build the ultimate off-road machine, an 89-94 2wd Toyota Pickup. For the tidy sum of $400 I drug one home complete with blown up motor and by morning had it stripped down for phase 1 of what turned out to be a lot of build phases. 5 maybe?
IMG_6946.jpg
 
First step was to design and build the front suspension. I forget all the specs but something like 6in over per side pulling 18" travel from a 10" shock using a modified stock spindle, a reverse strut lower arm, and tube uppers.
94yotaarmassy2.jpg
IMG_7002-1.jpg
IMG_7007-1.jpg
IMG_7068.jpg
 
The rear end was built simple with a 3 link setup and an Xrunner axle which was wider and still 5x4.5 lug. A simple bed cage worked to hold the shocks and relocate the stock gas tank. It held up surprisingly well despite all the naysayers but eventually did start cracking off the frame
trailingarmassy.jpg
IMG_7028.jpg
IMG_20120304_205307.jpg
IMG_7035.jpg
 
First trip out was Mojave Rd with some old friends in late March 2012. I had met my goal of building a new truck before my second son was born in April. Made it through the trip was no issues and it felt great to be out there again. The shock tuning was atrocious and the stock gears did not like 33in tires but it had so much travel it didn't matter.
IMG_20120315_135311-1.jpg
IMG_7039.jpg
IMG_7056.jpg
 
The single cab was fun to whip around like a go cart on trails too small for a truck but it got to be a bit of a handful when it came to rougher sections and the lack of storage space was getting a bit annoying. I tracked down a clean extra cab, some bits of frame rails and cut my truck in half.
IMG_20130831_151523_312_zps8c8815ea.jpg
IMG_20130902_164635_813_zps6209c9d8.jpg
IMG_20130930_180941_774_zpsdac24842.jpg

First trip out was an epic trek to the grand canyon where all that extra room was sure appreciated.
IMG_7769_zps0565afa4.jpg
IMG_7847_zps3da30d38.jpg
 
Along the way I kept redesigning, strengthening, and improving upon the truck.

Fabbed spindles, Dana 44 hubs and Willwood brakes were added to the front
dANA44Front_zps6527411b.jpg
IMG_20140408_190355_014_zpse1ba753a.jpg

I was always looking for more up travel in the rear and added bypass shocks
IMG_20140510_180018_674_zps6x0kvha3.jpg
IMG_20140510_191533_000_zpsxtvupwmx.jpg

IMG_20140508_185050_037_zpsjblixdfp.jpg

DMCTday3_zpsd2108841.jpg
IMG_20140413_103209_916.jpg

More great trips ensued and friendships enriched but a series of events unfolded where my motor blew and I bought property to build a house so the truck took a bit of a hiatus as life took over for a couple years.
 
I took the opportunity of this hiatus to makeover the truck again. More power would be nice and I felt my luck was running a little thin not having a cage to strengthen and protect.
A Lexus LS400 was sourced to pull the motor and trans from
IMG_20110529_151708.jpg
IMG_20140521_222435_361_zpswqntbkky.jpg
IMG_20140529_193425_038_zpsrh66nac4.jpg
IMG_20140731_220237_550_zpspl7ltpwp.jpgIMG_20140815_070541_580_zpsfnwllqpy.jpgIMG_20141020_194222_114_zps2c2tkbbj.jpgIMG_20141117_220644033_zps3uwyfchw.jpgIMG_20141117_220926731_zpsjq9fdvel.jpgIMG_20150214_002826_zpsm5kwmazw.jpgIMG_20160130_171454825_zpslbmetrbl.jpgIMG_20170517_201244502_zpsewgofcro.jpg


The engine swap and wiring went fairly smoothly and eve though the first test drive ended up stuck in a rut, the truck was back on its feet and ready to go
IMG_20170731_194149296.jpg
 
The onslaught of trips started again and the increase in power with the V8 as well as the increased rigidity of the cage made it all the more fun.
IMG_20170826_124002574.jpgIMG_20180113_143533341.jpgIMG_20171229_163312998.jpgIMG_20171231_123330105.jpgIMG_20180302_174729030.jpg
Most of this period was spent trailer-ing to the desert as I never put the windshield back in. It was good to be back but that summer itch arrived and out came the Sawzall
 
I was fairly pleased with how the truck was working but I wanted increase the reliability a bit as well as expand the gas and storage capacities. I added a 32 gallon fuel cell, 40 spline full floater nine inch axle, sway bar, and dual spares mounted to a big trunk lid
Rear End Redo Assy 3.JPG
IMG_20180531_222410457.jpg
IMG_20180611_074541088.jpgIMG_20180624_215013122.jpgIMG_20180909_204446863.jpg
IMG_20180909_204506908.jpgIMG_20200131_180023149.jpgIMG_20200208_180650005.jpg
IMG_20200829_221039470.jpg
VID_20201004_163911700_exported_4512_1601866017085~2.jpgIMG_20201010_122940806_BURST001.jpgIMG_20201114_135013641_HDR.jpgIMG_20201211_122047191_HDR.jpg
 
Last edited:
Of course I am never pleased with good enough and cut the roof off, redid all the lacing, and replaced it with a non sunroof model to gain a bit of clearance inside.
IMG_20210814_195613179.jpg

I got it back together in time for an awesome Arizona trip and a few others

IMG_20211105_164121403_HDR.jpgIMG_20211107_075923555_HDR - Copy.jpgIMG_20211218_105652672_HDR.jpgIMG_20211230_160659423_HDR.jpg

This round of trips ended with a RTT mounted and a ride home from AAA with a hole in the block
IMG_20220204_133901745_HDR.jpg
IMG_20230108_192246731.jpg
 
The past year has been agonizing as I swapped the motor out.Got it back together just in time for a redemption trip to KOH. Made it through the weekend with no issues. It felt great to drive again.
IMG_20230211_160736107_HDR.jpg

Of course I can't leave well enough alone. Needed to upgrade the carrier bearing so went with an Inland Empire polyurethane meant for a ranger but fit right in. Also put a new muffler on. Hoping to be a bit louder as it was difficult to hear the shift points with headsets on.
IMG_20230314_190019900.jpg

Also doing a spring swap and finally installing limit straps.
IMG_20230314_185852622.jpg
 
This makes me want to build another Pickup.

By the way, I vote for a return to the '90s front clip. Make Toyota Pickups great again.
100% agree. His tires should be 95% outside the fiberglass just like mine.

I think he needs the extra hood length to fit the motor and radiator maybe??
 
Back
Top