philofab
Active member
My uncles old 2013 4wd Tacoma has clapped out leaf springs. ISO a take off set in decent condition. +1"+2" height ok too.
ISO 05-25 Toyota Tacoma 4wd leaf springs.
- Thread starter philofab
- Start date
WW_RANGER_X
Well-known member
For what it's worth, I remember the Tacoma's having a leaf spring recall. Might be something to look into.
2013 didn't have the recall just 2005-2011
4xFoorOffroad
Active member
Icon and other brands make a 3 spring add a leaf that works pretty well. I’d look here if there’s a bit of urgency for replacing them:
https://www.tacomaworld.com/forums/2nd-gen-tacoma-parts-marketplace-2005-2015.122/
https://www.tacomaworld.com/forums/3rd-gen-tacoma-parts-marketplace-2016-2023.202/
3rd Gen stock takeoffs will give an inch or two of lift over your uncle’s clapped out springs and might be the cheapest option.
https://www.tacomaworld.com/forums/2nd-gen-tacoma-parts-marketplace-2005-2015.122/
https://www.tacomaworld.com/forums/3rd-gen-tacoma-parts-marketplace-2016-2023.202/
3rd Gen stock takeoffs will give an inch or two of lift over your uncle’s clapped out springs and might be the cheapest option.
philofab
Active member
No urgency. The axle just twists a crazy amount with the blocks and one main leaf is bent funny near the front spring eye. Probably been that way for years. We noticed it dealing with the slip yoke binding on stops.
