Sold Camburg 3.50" Rear End 73.50" WMS

Sold Item. She Gone!

Carlos_G

Member
Joined
Apr 12, 2022
Messages
32
Location
Huntington Beach, CA
I built this rear end with a bunch of parts we had laying around the shop.
some scratch/dented hubs and a set of axles that were ordered for a customer who upgraded halfway through the build.

here are all the specs , no used parts

Camburg 3.50" Mig Welded Housing - Fill , Vent, Drain , Truss & hardware
Camburg 2.50" Rear Hubs 5 x 5.5 - 40 spline Driveplates (scratch & dents / blems)
Coleman 12" x 1.25" Vented Rotors (brand new)
Wilwood 4Piston Superlite calipers (brand new in boxes)
Wilwood BP20 brake pads
40 Spline 300m Full Float Axles

RETAIL VALUE $7,375.00

asking $6,400.00
can ship on buyers dime..

pics coming soon..
 

Attachments

  • Screenshot 2023-06-09 at 2.26.22 PM.png
    Screenshot 2023-06-09 at 2.26.22 PM.png
    2.7 MB · Views: 38
  • Screenshot 2023-06-09 at 2.26.32 PM.png
    Screenshot 2023-06-09 at 2.26.32 PM.png
    2.3 MB · Views: 29
  • Screenshot 2023-06-09 at 2.26.41 PM.png
    Screenshot 2023-06-09 at 2.26.41 PM.png
    2.3 MB · Views: 29
  • Screenshot 2023-06-09 at 2.26.49 PM.png
    Screenshot 2023-06-09 at 2.26.49 PM.png
    2.4 MB · Views: 35
  • Screenshot 2023-06-09 at 2.26.58 PM.png
    Screenshot 2023-06-09 at 2.26.58 PM.png
    2.3 MB · Views: 38
  • Screenshot 2023-06-09 at 2.31.31 PM.png
    Screenshot 2023-06-09 at 2.31.31 PM.png
    2.8 MB · Views: 39
  • Screenshot 2023-06-09 at 2.31.41 PM.png
    Screenshot 2023-06-09 at 2.31.41 PM.png
    2.9 MB · Views: 41
  • Screenshot 2023-06-09 at 2.31.54 PM.png
    Screenshot 2023-06-09 at 2.31.54 PM.png
    1.1 MB · Views: 40
Last edited:
will you have them weld on spring perches, then give me an ADA/disabled/handi-fucked discount?
if so, how many grand off?

wait, fuck. no third?
how much with what i said and will you throw the third in for me being sexyashell?
 
Back
Top