B-FAB Random Fabrication/Projects

BFAB

Active member
Joined
Feb 24, 2023
Messages
52
Location
Bakersfield CA
BFAB share folder!


Place to post up shops builds, random fabrication, metal projects to share ideas and processes, progress of builds.
 
Last edited:
Here’s some of our 3.5 and 4” axle housings we’ve been building.
 

Attachments

  • IMG_1304.jpeg
    IMG_1304.jpeg
    3.2 MB · Views: 9
  • IMG_1303.jpeg
    IMG_1303.jpeg
    3.5 MB · Views: 9
  • IMG_1284.jpeg
    IMG_1284.jpeg
    3.5 MB · Views: 9
  • IMG_1283.jpeg
    IMG_1283.jpeg
    3.7 MB · Views: 9
  • IMG_1275.jpeg
    IMG_1275.jpeg
    2.9 MB · Views: 8
  • IMG_1242.jpeg
    IMG_1242.jpeg
    1.8 MB · Views: 8
  • IMG_1241.jpeg
    IMG_1241.jpeg
    1.9 MB · Views: 7
  • IMG_1243.jpeg
    IMG_1243.jpeg
    1.9 MB · Views: 7
  • IMG_1125.jpeg
    IMG_1125.jpeg
    3.2 MB · Views: 7
  • IMG_1120.jpeg
    IMG_1120.jpeg
    2.9 MB · Views: 7
  • IMG_1113.jpeg
    IMG_1113.jpeg
    2.8 MB · Views: 6
  • IMG_1116.jpeg
    IMG_1116.jpeg
    2.4 MB · Views: 9
  • IMG_1111.jpeg
    IMG_1111.jpeg
    2.1 MB · Views: 7
  • IMG_1112.jpeg
    IMG_1112.jpeg
    2.7 MB · Views: 8
More shop build/projects updates


Got Josh Williams cab cage almost finished in his class 2000 Toyota build.
IMG_1970.jpeg


Started a new 3.5" axle housing for my brothers new ranger build.

Using Desert Specialties 2.5" hubs.
6555EC3C-D9FB-4200-B938-EB293EA4A5DE.jpeg


Also did a cage in a Crown Vic for a local racer. This class is gonna be super fun.
IMG_1918.jpegIMG_1917.jpegIMG_1916.jpeg
 
Also yesterday started removing the old springs and hangers to add in new F67’s on the rear of the truck.

IMG_1980.jpeg

Texas Customers rear link kit assembly ready to be shipped! 4 Runner builds gonna be legit!

48” offset trailing arms
Lower axle link mounts
Frame upper and lower link mounts
Trail gear rear truss and upper 4 link mount
Piñon/diff guard
IMG_1832.jpeg
 
Started assembling some more CM kits… 84" kit going to SDHQ In AZ for a customer of theirs.

A 91" kit going to a new 6100 build. They also purchased one of our 3.5" housings for their prerunner.
IMG_2065.jpegIMG_2082.jpegIMG_2080.jpegIMG_2081.jpeg

I think we’re on axle housing #11 or something as well now in the last 2 months and now have them in 3 states.
IMG_2068.jpegIMG_2062.jpegIMG_2040.jpeg


Also drew up and cut a new fuel cell cradle for @b2pmotorsports in Texas. uses a 35gal JAZ Jeepspeed cell.
IMG_2149.jpegIMG_2148.jpegIMG_2147.jpegIMG_2146.jpeg
 
Last edited:
Back
Top