2018 can-am prerunner build

FarmerMike

Active member
Joined
Apr 4, 2022
Messages
79
So bought this thing used back in December it had raced the NORRA 500 in 2019. Car had a pretty good amount of aftermarket parts and upgrades for UTVs.

Exterior
Factory UTV full skid
King shocks front and rear
Method race wheels
32” Tensors

Interior
Everything PCI offers
Kenwood race radio
PCI Bluetooth intercom
PCI fresh air system
Lowrance 7” HDS gps
Pyrotectunder seat 10 gallon fuel cell


The plan for it was just another cheap prerunner for races and Mexico fun and had a fair amount of good parts on it and got it at a good deal. Firs thing I did was swap out the tensor for some 32” BFG km3. Then just run and see how I like the short wheelbase car.
 

Attachments

  • F7F45ACA-92FD-4944-AB0C-ADE4886D38F8.jpeg
    F7F45ACA-92FD-4944-AB0C-ADE4886D38F8.jpeg
    368.9 KB · Views: 26
  • 1BF24352-A2D4-4572-A429-93584A998458.jpeg
    1BF24352-A2D4-4572-A429-93584A998458.jpeg
    433.2 KB · Views: 17
  • EFC0B975-3A5E-4413-9E04-4F0FD414A0F0.jpeg
    EFC0B975-3A5E-4413-9E04-4F0FD414A0F0.jpeg
    420.4 KB · Views: 10
  • 0CA8A96A-E279-4399-8E30-94A6886A0A9E.jpeg
    0CA8A96A-E279-4399-8E30-94A6886A0A9E.jpeg
    427.9 KB · Views: 9
  • C78381B2-3BA6-4BF3-9D46-6DDF27E0D422.jpeg
    C78381B2-3BA6-4BF3-9D46-6DDF27E0D422.jpeg
    413.2 KB · Views: 12
So after prerunning the hammers course a few times in this thing I did not like (feel safe) in the factory cage so ordered a basic one that I can build off of to how I want it, started unbolting the plastics and took the doors off to get set to install a new cage and full metal doors.
 

Attachments

  • C07684A9-68DC-47E8-826A-6AEB997FEF64.jpeg
    C07684A9-68DC-47E8-826A-6AEB997FEF64.jpeg
    483.5 KB · Views: 11
  • 2A4D1F1D-ADC9-4C18-90A8-5A4F824F7928.jpeg
    2A4D1F1D-ADC9-4C18-90A8-5A4F824F7928.jpeg
    276.3 KB · Views: 11
  • 36A454F7-D064-4DC1-8128-D1A9EF00EDC6.jpeg
    36A454F7-D064-4DC1-8128-D1A9EF00EDC6.jpeg
    380.3 KB · Views: 11
  • F91ADF77-E9E8-457F-83C6-E1B90A6F93EC.jpeg
    F91ADF77-E9E8-457F-83C6-E1B90A6F93EC.jpeg
    415.3 KB · Views: 10
  • 230FED9C-9874-4FB9-924B-8C0DE3D66609.jpeg
    230FED9C-9874-4FB9-924B-8C0DE3D66609.jpeg
    401 KB · Views: 17
So I spoke to a guy today at Qualtiy auto in Hemet, ca

I guess he builds up UTV's for more exploration type trips and said he had done a few trips from California to AZ.

They sounded really cool. Maybe you could hook up with him for a ride!
 
Finally had time to finish up cutting out the factory cage and got the new one bolted down along with some new doors.
 

Attachments

  • 90732615-D2DB-45B5-AF83-2068130C1FE2.jpeg
    90732615-D2DB-45B5-AF83-2068130C1FE2.jpeg
    427.8 KB · Views: 18
They are speed limited far below 100mph from factory.

It's the people that disable the speed limiter that are able to go 100+
 
Picked up 12 new style bead grip wheels from the warehouse at method, I had amazing service from Wally to the guys at the warehouse to pick up, I was amazed how much stock they have their it was massive.
 

Attachments

  • 30FAED49-3BEB-4D4F-9B88-6F8C0340A52D.jpeg
    30FAED49-3BEB-4D4F-9B88-6F8C0340A52D.jpeg
    606.4 KB · Views: 8
  • 8DD98A6D-962A-4AFA-96F3-10A59AA53A30.jpeg
    8DD98A6D-962A-4AFA-96F3-10A59AA53A30.jpeg
    601.8 KB · Views: 11
Last edited:
Holy cow lots of wheels and tires in my life lately. Finally had time to mount them up, seems like it took all day but was only 4 hours to mount 12 of these wheels and tires and then 4 more for my truck.
 

Attachments

  • EA07E45A-70F1-4628-A3AD-DB3C34548C5A.jpeg
    EA07E45A-70F1-4628-A3AD-DB3C34548C5A.jpeg
    487.9 KB · Views: 9
  • B33C37DB-83CC-472E-A380-6BB85D96E878.jpeg
    B33C37DB-83CC-472E-A380-6BB85D96E878.jpeg
    337.2 KB · Views: 8
  • 85CA3485-1D5D-4C5F-B58B-7B86CD0673BE.jpeg
    85CA3485-1D5D-4C5F-B58B-7B86CD0673BE.jpeg
    342.3 KB · Views: 7
Back
Top