Joe27
New member
Ranger build list
2010 Ford Ranger XLT
SOHC 4.0 V6
Custom built TH400 transmission
RPM custom long tube headers
K&N cold air intake
Large CBR radiator with custom shroud and dual SPAL fans
BTF custom Long travel kit
Strapped at 17” of travel
10” fox 2.5 coilovers
10” king 2.5 triple bypasses
2.0 Fox bumps stop
2” custom tie rods with double sheer steering
Dana 44 front hubs with Solo Motorsports caps
Jamar brake pedal and remote master with Wilwood calipers on all 4 corners
GG lighting front and rear camera
Custom full engine cage
Frame plated, fully custom from upper arms mounts forward
4 GG lighting GP40 pods with amber covers
5 17” Race line monster beadlocks with 37” 12.5 BFG K02 tires
Custom cab cage that is tied in to the engine and backhalf.
corbeau Baja SS Seats with PRP 4 point harnesses
PRP steering wheel
Sidewinder gate shifter
Fiberwerx custom center console
Rugged radio race radio and intercom with headsets
Mob armor iPad mount (IPad not included)
Dual battery shutoff switch
Fire extinguisher mounted behind driver seat
Fire extinguisher mounted on the backhalf on passenger side
Custom backhalf
Camburg 3 link kit strapped at 28” of travel
King race series 2.5x14 coilovers
King prerunner series 2.5x16 Triple bypasses
King 2.5x4” bump stops
Jaz 32 gallon jeep speed fuel cell
Everson sway bar
Harbor freight 2.5 jack mounted to a Solo Motorsports jack mount
Derale transmission and engine oil coolers with electric fans.
Jamar 2.5 hubs in the rear
Evil manufacturing 3rd brake light with a Baja designs S2 amber pod.
ID Designs 4” rear housing
40 spline chromoly shafts
Yukon case
6.0:1 R&P (if I remember correctly)
40 spline spool
The fiberglass is not currently on the truck, the front fiberglass was damaged. I believe it can be repaired, the bedsides have some small damage near the taillights, that can be repaired. I also have multiple spare parts for the truck that includes a new dash, spare axle shaft, and other parts. Reach out for more information.
$40,000 0b0
-Joe
949-701-8899
2010 Ford Ranger XLT
SOHC 4.0 V6
Custom built TH400 transmission
RPM custom long tube headers
K&N cold air intake
Large CBR radiator with custom shroud and dual SPAL fans
BTF custom Long travel kit
Strapped at 17” of travel
10” fox 2.5 coilovers
10” king 2.5 triple bypasses
2.0 Fox bumps stop
2” custom tie rods with double sheer steering
Dana 44 front hubs with Solo Motorsports caps
Jamar brake pedal and remote master with Wilwood calipers on all 4 corners
GG lighting front and rear camera
Custom full engine cage
Frame plated, fully custom from upper arms mounts forward
4 GG lighting GP40 pods with amber covers
5 17” Race line monster beadlocks with 37” 12.5 BFG K02 tires
Custom cab cage that is tied in to the engine and backhalf.
corbeau Baja SS Seats with PRP 4 point harnesses
PRP steering wheel
Sidewinder gate shifter
Fiberwerx custom center console
Rugged radio race radio and intercom with headsets
Mob armor iPad mount (IPad not included)
Dual battery shutoff switch
Fire extinguisher mounted behind driver seat
Fire extinguisher mounted on the backhalf on passenger side
Custom backhalf
Camburg 3 link kit strapped at 28” of travel
King race series 2.5x14 coilovers
King prerunner series 2.5x16 Triple bypasses
King 2.5x4” bump stops
Jaz 32 gallon jeep speed fuel cell
Everson sway bar
Harbor freight 2.5 jack mounted to a Solo Motorsports jack mount
Derale transmission and engine oil coolers with electric fans.
Jamar 2.5 hubs in the rear
Evil manufacturing 3rd brake light with a Baja designs S2 amber pod.
ID Designs 4” rear housing
40 spline chromoly shafts
Yukon case
6.0:1 R&P (if I remember correctly)
40 spline spool
The fiberglass is not currently on the truck, the front fiberglass was damaged. I believe it can be repaired, the bedsides have some small damage near the taillights, that can be repaired. I also have multiple spare parts for the truck that includes a new dash, spare axle shaft, and other parts. Reach out for more information.
$40,000 0b0
-Joe
949-701-8899
