smokeysevin's latest activity
-
smokeysevin reacted to Twisted Sid's post in the thread Local Legend Project: Tur-BRO-yota with
Like.
A 3uz is aluminum -
smokeysevin replied to the thread Local Legend Project: Tur-BRO-yota.2.9 is the right call. Sean
-
No, the Sequioa uses a chipped key with a “transducer” ring around the ignition to pick up the chip in the key. You must have the...
-
smokeysevin replied to the thread Rusty Red.If you want it, I have the later plastic intake manifold, throttle body adapter, and new pink injectors I ran on mine before deciding to...
-
Ok back on the truck. Got motor and trans mounted up. Got steering figured out just need a few more parts final welded and inner tie...
-
This is basically why I am doing this. Even with 5:29 gears, my 3.4 works HARD to maintain freeway speeds. The constant shifting between...
-
Another option: https://www.tacomaworld.com/threads/another-truck-third-times-the-charm-turbocharged.786969/page-29#post-30696099...
-
Figured I’d throw up what I’ve been growing/attempting to make nice on the house. Right now I’ve been neglecting the plants, but here’s...
-
Noises and tork are all that matters
-
smokeysevin replied to the thread Rusty Red.Ah my bad, I though there was a GS430 or LS400 with the a340. Sean
-
When I started looking into this, the early 1uzfe was the choice, but these motors are getting old and have some real old tech…dual...
-
smokeysevin replied to the thread Rusty Red.Honestly for a taco, I would look at the later 1uz or the 3uz from the early gs430s that I think still used the a340. Those motors were...
-
smokeysevin reacted to desert_steve's post in the thread Looking for your input on the future of my Nissan with Like.
Option 5: TTB the front, link the back, and let it live out the rest of its life on jackstands as an unfinished project.
-
The roller size (and wire size) should be interchangeable so it isn't of the utmost importance, .035 is what I run typically but you...
-
smokeysevin replied to the thread Fiberglass repair.You want to grind the crack out so it doesnt keep tearing and show through on the front side. Its almost impossible to make it look good...