Klever's latest activity
-
Painted the swingers A close up of how I worked around the break booster and MC. I used a MC out of an explorer with the same... -
radius i wasnt sure how to do... so i took some speaker insert MDF that i had bought and cut into quarters and glued together. Worked...
-
look like crap. you want to make me one.
-
small update, which some may have seen on IG. I built this center console, first time really ever trying to build something like this...
-
I was speaking with a friend who predominately restores E9/10 BMWs in the Los Angeles area and he asked if knew anyone who did vapor...
-
Klever reacted to Nick_presson_obs's post in the thread For Sale 88-98 obs silverado long travel kit with
Like.
selling my Schumacher metal works long travel kit 3.5+" per side 17" travel upgraded billet tie rods fox 2.5x10 coilovers tuned by... -
Coolers mounted and plumbed
-
Ended up running the coax under the seat and the power out of the floor board through an existing grommet. Didn’t have to drill a hole...
-
Well it’s been a while but she’s got a new 3rd brake light and antenna now. Gonna mount the radio in the center console. Need to figure...
-
Klever reacted to Tahoe_Prerunner's post in the thread 2008 Chevy Tahoe Prerunner/Prelander Build with Like.
Update on the build: -Top of cage and rockers tube are full welded and pillars are ready to be tacked. -Stepped up to monster 40”...
-
Beams hung, steering cooler mounted, swingers mounted, and swinger tie rods set at zero position. Slowly moving forward.
-
Thank you! It was certainly a learning process, a buddy of mine had built a similar swing steer so I copied his design a bit, I got...
-
This has been an on-going spotting with a truck near my neighborhood. I saw a clean, stock, 1st gen Explorer driving home from work and...
-
Klever reacted to Camper shell fun's post in the thread Toyota Pickup (old Koenig racing truck) with Like.
Also a side note, I don't know what hubs Mike used, but if you want to make the truck a little narrower you can use Toyota straight axle...
-
Rear is almost back enclosed. Exhaust is ran all the way out the back. My boy has been helping do it all.
