Klever's latest activity
-
Front bumper taking shape and found a good spot for the 24” RV jack. Stolen idea from Danny Giannini. @NODNARB has been chipping away... -
Ride height dialed in and quarter panel trim pieces trimmed up to fit over the tubs with wiring tucked up behind them. Got that OEM plus...
-
The a/c quit on the Cummins so the Escalade had to tag in as a farm truck today haha
-
The time has come! No bites on the prerunner sale means… I’m finishing it! No better way than buying a fresh @Klever built Reid TH400...
-
Want to support the forum? Sticker Hats, Shirts, Sweatshirts, etc. available here. https://badlinesgoodtimes.com/store Just...
-
A few more progress pics.! After the Off-Road Expo on Saturday, I got pumped to work on the Bronco and get a few more things knocked off...
-
This 5VZ has an inch of grime from top to bottom, not to mention a nice bed of Oak leaves under the plenum. So when I lifted the valve...
-
Just left @85Yota ’s Ford Wrecking Yard… I’ll post again in another 7 months
-
And a good friend of mine gave me a VERY old BFG and factory Outlaw-style wheel I’ll use as a backup spare tire for my other spare tire...
-
Its engine cage time, I was snapping my core supports damn near every trip so it was time. The shocks towers the truck came with too...
-
Updates… not really. Took it to hammers. It broke. Hit a local jump back home As of today, Engine cage still broken, tire flat...
-
Have a set of 3.0 kuster 14 in coilovers with a 500 lower spring they were rebuilt but leak out of the seal cap. Internals are in good...
-
Solid downgrade from my lx470 - the skyjacker springs that came with the threat kit in the front are terrible (sprung way too high) and...
-
I have a truck that is sitting on 4 wheels again! I did have to drop the gas tank, but forgot to detach the filler neck/drain the tank...
-
Made some more progress on setting bearings/seals/ball joints, test fitting and generally getting things back together. I may have spoke...
