Klever's latest activity
-
About 2 years later, after bending and breaking a few too many front end parts, it was time to upgrade the front end. A buddy of mine... -
That all brings us basically to about a year ago. I originally planned on just doing a short course rear setup. The more I thought about...
-
Mocking up the frame kicks and trailing arms And just like that it’s linked.. easy peasy! Had to mock up the bedsides to make sure...
-
Thanks everyone for the kind words! It means a lot! Some small updates this week, trying to pick away at her.
-
Part 3 . Now it 2024 - 2025. Now we see there is a reoccurring trend that every 2 years the truck goes to Mikey and Jesse at the...
-
Definitely not huge by today’s standards but scored some 3.0x14’s for the front end. Just searching for some matching c/o and 2.5 bumps...
-
Got my Walker Performance Filtration air cleaner in so I wanted to figure out the intake piping. Running out of space up here quickly...
-
Welp, I turned it into an over lander in prep for a Rubicon trip. Going to test this set up this weekend at Coyote.
-
I know they say not to use brake cleaner or anything thats chlorinated to clean parts before welding...
-
Overkill on cage unless you absolutely know what you're doing. For your welds, turn the heat up a bit, maybe slow down the wire feed...
-
This is for the 1g raptor guys: "MP3" pocket
-
I lied about not doing hard trails. Got it fixed and went into Red Lake with it. Did great with the front locker finally functioning.
-
Also, I’m wanting to cage the truck. The only cage kit I’ve come across is the TE designs one. Not really looking to have that gnarly of...
-
Some updates on the truck Some updates on the truck, plates the frame made a bedcage and some other things, I took out the bench seat...
