Ckuebert's latest activity
-
Chttps://youtube.com/shorts/PGZPBKY5XE8?si=vGmBOtv3HyzArUG7
-
CCooling system done and fan programmed. Zero leaks. The ZL1 fan pulled the temp down from 210 to 190 is a few seconds when it kicked on...
-
CV8 noises have been made! Lots of wiring to clean up but she starts and doesn’t throw any codes….yet. The evap system is gone, so that...
-
CLets check in on this haha The front beams are all tacked together, we need to install them and cycle then we can weld them up. Vs ...
-
CCkuebert replied to the thread Upcoming Trip 2026 King Of The Hammers - King of the Canners.I will be there with @SByota
-
CTried like hell to make V8 noises in his weekend, but came up a little short. I’m close though! The old crusty thermostat housing...
-
CFinished welding the engine cage, reinforced the motor mounts and threw some paint on the bare metal. Engine bay is ready for a V8...
-
CAlong with getting all the fluids changed I put a ruffstuff diff cover on also bought Ryan’s billet 3rd brake light 🔥
-
COnly had a few hours before work tonight. Planned out the tubes and started laying them in. This will be so nice to weld up with the...
-
CStopped by Airgas on the way home earlier this week. $100! For a 80CF C25 cylinder exchange, I have never paid that much. Good thing...
-
CHold for photos…not working right now
-
CMill’s forward and reverse switch decided to die while I was using it to tap……worse possible time. Got that swapped out with one on...
