84Prerunner's latest activity

  • 8
    84Prerunner replied to the thread D44 5/8th stud.
    if the hub center bore doesn’t fit tight over your d44 hub those will be problematic. Flat lug nuts require a hub centric wheel. You can...
  • 8
    84Prerunner replied to the thread D44 5/8th stud.
    The bigger question is how is the wheel machined? If it’s setup for tapered lug nuts you should be able to get 1/2” or 5/8” lug nuts...
  • 8
    84Prerunner reacted to WW_RANGER_X's post in the thread THANKSGIVING 2025 PLANS? with Like Like.
    We had a blast. Didn’t run the big loop like I wanted on Thursday, but @4lowlance came out to camp for a couple nights so we did a 50...
  • 8
    84Prerunner replied to the thread BTF 98 Explorer.
    Less tire pressure lol Glad to see this thing getting used!
  • 8
    84Prerunner reacted to NODNARB's post in the thread BTF 98 Explorer with Like Like.
    Drove it around a little bit, was reminded it’s got a spool, thought id totally fubar’d the alignment first turn I hit. 😂 Stoked the...
  • 8
    84Prerunner replied to the thread Honda Ridgeline "prerunner".
    If you’re going to change it, go with Holley. It’s so well known and flexible
  • 8
    84Prerunner reacted to driftnslide's post in the thread Honda Ridgeline "prerunner" with Like Like.
    Finally got her out and made a lap around the block. The power steering was kicking my butt until now but I got it sorted out. Looks...
  • 8
    84Prerunner replied to the thread Magnetic Work Lights.
    I have the Braun you posted as #2 and the icon version of it. Both work fantastic just don’t let them fall face down against anything...
  • 8
    84Prerunner reacted to blue oval's post in the thread Engine Filtration with Like Like.
    I also converted from oiled foam filter to a Donaldson paper filter. I could only get one run out of the oiled foam filter. The...
  • 8
    84Prerunner replied to the thread Sxs tires on prerunner.
    They are very similar to the DOT MTR.
  • 8
    84Prerunner replied to the thread SOLAR.
    That sounds odd. Have any more specs on your system? Do you know if it’s operating correctly? Most purchased system actually work...
  • 8
    84Prerunner replied to the thread Engine Filtration.
    I wonder if it had something to do with turbulence between the throttle body and filter flow part. 🤔
  • 8
    84Prerunner reacted to Exploder_M's post in the thread Engine Filtration with Like Like.
    I work with construction equipment and those power core filters are the best that I have seen out there. They barely ever are caked with...
  • 8
    84Prerunner replied to the thread Engine Filtration.
    Same truck and intake with a dry filter
    • IMG_4254.jpeg
    • IMG_4255.png
  • 8
    84Prerunner replied to the thread Engine Filtration.
    Aftermath of running a kn with a uni prefilter.
    • IMG_4253.jpeg
    • IMG_4252.jpeg
Show older items
Back
Top