4XForOffroad's latest activity
-
Some more close ups. Working on getting wire looms and plumbing into place. Will be ZIP Tie certified at the end of this project. -
Explorer sold today, new owner is on the forum and has some rad plans for it! Stoked.
-
Horns and photo courtesy of @BATTEN
-
4XForOffroad reacted to turbomonty's post in the thread The Turbo Glue Factory: Boosted Colt Build with
Like.
Yes -
If you want your kids to have the coolest wagon on the block... https://www.facebook.com/marketplace/item/1229522339397210/?mibextid=dXMIcH
-
Goodbye Toyota LSPV, hello Willwood manual adjustable proportioning valve. The brake line doesn’t rub on the fuel tank now. It will be...
-
Pulled my dash panel and center console lid the other day and finally wrapped them in suede. Makes it feel more finished.
-
The 9” I got earlier in the year has finally made it out to the bronco in phoenix while I’m still in CA with all my tools, basic...
-
4XForOffroad reacted to SaltyMethods's post in the thread TC Gen 1 Caddy kit, convert to coilover? with Like.
JD Fab recommends a 600lbs single spring and I ran that initially but I wanted to do what I could to soften up my front end. So I was...
-
4XForOffroad reacted to SaltyMethods's post in the thread TC Gen 1 Caddy kit, convert to coilover? with Like.
I swapped from Swayaway torsions to coilovers. Definitely smoothed out the ride. Did the hoop with 2.5 coilovers and bypasses. Blew out...
-
So 3 times now I’ve needed to get a tire off the ground mid trail and had to use several high lift jacks to make it happen. Have yet to...
-
4XForOffroad reacted to badlinesgoodtimes's post in the thread Toyotally Awesome 94 pickup with Like.
Metcho got the intake on and everything put on so it was ready to drop in when I got home from work. 22re party in the garage. in...
-
4XForOffroad reacted to driftnslide's post in the thread Honda Ridgeline "Wabi-Sabi" prerunner build with Like.
So I looked up the specs for the cheapo fand I originally purchased. They are only rated for 900 COMBINED cfm. Hahaha. What a joke. I...
-
4XForOffroad reacted to philofab's post in the thread TC Gen 1 Caddy kit, convert to coilover? with Like.
-
4XForOffroad reacted to philofab's post in the thread TC Gen 1 Caddy kit, convert to coilover? with Like.
I just picked up a 94 regular cab 4wd 22RE with a Gen 1 Caddy kit. Still uses the upper arm torsion bar. It seems really stiff and I'm...