4XForOffroad's latest activity
-
4XForOffroad reacted to turbomonty's post in the thread The Turbo Glue Factory: Boosted Colt Build with
Like.
Time to fight the final boss in fabrication Main center link and then baby tie rods to the knuckles -
Are you still running these? I know this is an older thread. Any updates? The bypass chatter in the bronco is pretty damn rowdy. Not...
-
I have thought about that too. I'll keep messing with it and see what I come up with. Also, I think it's worth noting that I did chop...
-
Been a while since this has been updated but have had the explorer out once more before I tore into the rear suspension. Shortly after...
-
4XForOffroad replied to the thread Chop Shop Builds.Oversized them a little so you can grind them down on one or two sides if you change your mind. Take a page out of Dave Frieburger’s...
-
Picked up some new radius arms to fix the caster with the lift and move the axle about an inch forward. I didnt take time to get any...
-
4XForOffroad reacted to driftnslide's post in the thread Honda Ridgeline "Wabi-Sabi" prerunner build with Like.
No. I pretty much wrote off getting a fiberglass clip at least for a season. Chances are I'll end up running a first gen tundra clip and...
-
4XForOffroad replied to the thread Seatbelt rebuild service recommendations?.Guys with 1st Gen Tacoma’s on Tacomaworld have been using those guys for awhile since OEM has become discontinued or scarce for certain...
-
I did a horrble job taking pictures of the other cabins in the valley. The overflow cabin located up and behind the Hilton could be...
-
Bought new rotors for the rear, new pads for both front and rear, and finally bought rotor adapters from wilwood. I talked to Kaleb at...
-
4XForOffroad reacted to STUDIO305's post in the thread Sold Miller Syncrowave 210 With Coolmate Water cooler with Like.
Hey all, up for sale is my Syncrowave 210 welder with Coolmate water-cooler($1000) I removed each panel and had everything powder...
-
Slow going but getting stuff done. Finished most of the welding. Got limit straps tacked in. Started on sway bar mounting. Got the short...
-
4XForOffroad reacted to WW_RANGER_X's post in the thread OFF-ROAD EXPO 2026 OCT 3-4/BLGT BOOTH AGAIN? with Like.
Well, its March which means i make my annual OFF-ROAD EXPO thread lol. Back at the OC Fairgrounds in Costa Mesa. Some may think it's too...
-
4XForOffroad reacted to driftnslide's post in the thread Honda Prerunner Wabi-sabi shakedown with Like.
Had a great shakedown run on the previous Saturday. Had some issues with a flat tire on a trailer on the way out but made it there...
-
I bit the bullet and purchased the Aces EFI Jackpot pro kit on sale. COULDNT BE HAPPIER. Holy cow was it easy to set up and tune. For...