4XForOffroad's latest activity
-
4XForOffroad reacted to driftnslide's post in the thread Honda Ridgeline "Wabi-Sabi" prerunner build with
Like.
Well, I can safely say the ACES EFI was money well spent. What a dream for tuning and setup. Ran great out there in ocotillo and the... -
4XForOffroad reacted to Turboyota's post in the thread Local Legend Project: Tur-BRO-yota with Like.
Sigh.
-
Got the light all wired up, super low key and does exactly what it said it does. Mounted the switch on the dash, a switchpro or spot or...
-
brings is to current day, i work on the truck once every week or so since i work my job full time and little by little chipping away at...
-
Drivers side done. Time to pull everything apart, get the last few things welded, and paint! Intake and filter done. Spectre inline...
-
I bumped up too. Ken and I ate pretty clean except some 395 Carls Jr on the drive out. We both tried to cram as many calories as...
-
As mentioned by the_falab, add supports to the wheel opening. I added supports at the wheel openings. 1" tube welded to the body with a...
-
frame horns cut off placed an order for 4 coilovers. 2.5x10 and 2.5x16 bypasses 3.0x10 and 3.5x18 4 bump stops. 2.0s up front and 2.5s...
-
This is where i decided i wanted to link the truck instead of leaf springs. and really realized i should have just bought a stock truck...
-
So welded on the mazulla front shock towers and forgot to take photos smh. welded on front frame plates. then i bought the TE designs...
-
finished the cage, built cab tie ins and floor close plates, stitch welded all of them in, and then silicone sealed the floor plates. i...
-
so in febraury of 2025 is when i put the truck up on jackstands and started to tear into it, luckily had guidance of a few friends who...
-
4XForOffroad reacted to turbomonty's post in the thread The Turbo Glue Factory: Boosted Colt Build with Like.
Time to finish up some welds
-
-
Well updates to the Bronco are going to be even slower than what they are now I finally got my own place for my family and it has a...