JF TT Expo

[juberafab]

lets talk about the castle cut out of sheet metal in the background. lol

I'll just let you ask @mrs.juberafab about that. Ask her when they will be done. Or don't.

 

[juberafab]

looks fun

Fun is a word you could use.

 

[juberafab]

We gutted the cab as much as possible before pulling it up on the table. It was a little intresting getting the cab up on the table. I used our small 4500 lb winch to pull it up on the table. Took some time but we got it done. Once on the table we were able to start positioning it on the y frame.

 

[juberafab]

Our buddy Nick lent us a mock up motor so we could keep moving forward. We also got a mock up 4l80e case. I had to make plates the bolted to the bottom of the block to get the correct height of the oil pan with clearance added in. The tubing layout stated coming together pretty quick.

 

[juberafab]

We will be running a 4 inch camburg housing with our "TT" front and rear hubs. The front shock crossmember is all finished up. Time to move to the next step of the cage.

 

[Pictafiedesign]

This is going to be kickass!

 

[juberafab]

This is going to be kickass!

Thanks! Trying to catch this thread up. We are just about ready to blast the chassis and paint before the cab gets final fitment. Then we can finish paneling it in.

 

[juberafab]

Some progress picture of the chassis coming together and the start of the trailing arms. Also some reverse engineering of the cam urg housing so I could design the link pockets.

 

[juberafab]

Steering box parts being machined to.finish the steering box mount and pitman arm coupler. We had our buddy minworx in AZ build us a box for thos build. Big bore saginaw box off a 90 4x4 suburban. This is the same box we run on our race truck with no issues.

 

[the bodj]

Nice and tight stacks on the mig, I like it!