Wyatt_cato
Active member
ISO total chaos or JD fab steering parts for 93 Toyota pickup. Looking for centerlink, pitman arm and idler arm. Who’s sitting on some parts!
ISO built toyota steering
- Thread starter Wyatt_cato
- Start date
desert_steve
Well-known member
Wyatt_cato
Active member
Hurts so much seeing something was for sale a year go lol
desert_steve
Well-known member
Ive seen A LOT of people looking for it (the steering) over the years, but have only heard of a couple people finding it. Maybe you could bribe @Camper shell fun into talking the TC overlords into making a run of them?
Last edited:
Austen2019
Active member
- Joined
- Jan 30, 2024
- Messages
- 96
does jd fab not make them anymore?
desert_steve
Well-known member
They still make it. Its a significant financial investment compared to doing "upgraded" ambulance steering like the beamed bois get to do.
Austen2019
Active member
- Joined
- Jan 30, 2024
- Messages
- 96
That shit is the same as stock pretty much.
But the jd fab steering is absolutely amazing after putting it on my race truck I could literally drive down Barstow main holding the steering wheel with my pinkie. It was the best investment I ever did to my race truck worth every penny. Did 5 races on it and everything was still tight.
desert_steve
Well-known member
Agreed. But for what most people do, the ambulance steering is more than enough.
Camper shell fun
Well-known member
- Joined
- Jun 10, 2022
- Messages
- 104
So here’s the problem with our steering stuff. It works awesome for a truck like Eliot but then people want to start putting 35” projects for 37 on the trucks and the steering components that we build were just not designed around that. The stuff that was on Vance’s truck started out as our production stuff and then as he went faster and faster we had to beef up what he was using. I mean, I still have all fixtures and notes and everything but it’s also designed around our suspension components.
Camper shell fun
Well-known member
- Joined
- Jun 10, 2022
- Messages
- 104
So here’s the problem with our steering stuff. It works awesome for a truck like Eliot but then people want to start putting 35” projects for 37 on the trucks and the steering components that we build were just not designed around that. The stuff that was on Vance’s truck started out as our production stuff and then as he went faster and faster we had to beef up what he was using. I mean, I still have all fixtures and notes and everything but it’s also designed around our suspension components.
what arms do you have?
SaltyMethods
Well-known member
Anyway I can purchase a TC pitman arm on it's own?
Camper shell fun
Well-known member
- Joined
- Jun 10, 2022
- Messages
- 104
Not for a 2WD, also there are two different Pittman arm splines for a 2 Wheel Dr depending on the year and or power steering or non-power steering
SaltyMethods
Well-known member
How about for 4WD? I have power steering. 1998 T100 4x4.
desert_steve
Well-known member
https://www.chaosfab.com/product/1993-1998-Toyota-T100-4WD-Caddy-Idler-Arm-95130
@Camper shell fun I think the OP is running an old school ESB kit.
Camper shell fun
Well-known member
- Joined
- Jun 10, 2022
- Messages
- 104
Yes we have King Kong steering for the 4x4 trucks. Pitman, center link and Idler arm as well as heimed tie rods and steering arm gusset.
SaltyMethods
Well-known member
Thanks but I was wanting the TC pitman arm.
