mrbrown
Well-known member
Windshield and back glass in today. Pretty cooool.
F250 crew cab build
- Thread starter mrbrown
- Start date
mrbrown
Well-known member
Didn’t make it on the dyno today but still a very productive trip. Got it running and found problems with my sensor configuration that we couldn’t figure out before. Hopefully going to handle that in the next day or so and return. Winched on the trailer and got to drive it off so not all bad.
mrbrown
Well-known member
I sure hope so lol I'm tired of saying "it's soo close" lol
mrbrown
Well-known member
Made it on the wheels today! Found out I need a VSS because it won’t go into third gear lol kind of a no shit situation but we overlooked it. Other than that it’s running great. I will have to find a solution to that and come back to do real pulls and mess with shift points.
mrbrown
Well-known member
I think all the kits are for a Bronco. My T case looks different.
Bracket probably wont work on a 4407 TC that you have, but you can fab up a stand off bracket and mount the ring to the back of the yoke. I mounted the tone ring to my ring gear and then put the sensor into my Tubeworks housing, you could use the rear diff cover.
mrbrown
Well-known member
Fresh tint for the expo to keep my ice chest out of the sun…
mrbrown
Well-known member
Can I get an amen in this DA sanded front bumper for the show? Lol it will be chromed at some point don’t worry.
the bodj
Well-known member
This might be the truck I'm most excited to see this weekend
mrbrown
Well-known member
Its just a shed cover thing built off that container, open in the front. My buddies house.
mrbrown
Well-known member
Means a lot man! it's not mint or done but it looks pretty cool lol
mrbrown
Well-known member
mrbrown
Well-known member
Starting on our post expo punch list of issue items that the dyno revealed.
1. Missing Vehicle speed sensor
2. Intake tube was too restrictive
3. “Who’s dumb idea to put any type of cat on this punch that out“ umm mine
1. Missing Vehicle speed sensor
2. Intake tube was too restrictive
3. “Who’s dumb idea to put any type of cat on this punch that out“ umm mine
mrbrown
Well-known member
Bronco VSS kit on the F250 Tcase 
mrbrown
Well-known member
Intake tube 2.0 opened up the 2to1 transition for Mo powa baby 
mrbrown
Well-known member
HELP! I need wire pins for the ford ECU! The vss wires were cut flush so the connector needs to be repinned with wires going to the new vss situation.
