Camp Kyle Shit Box Show Down Ranger

[Isaac.Helton]

Are the only bent tubes the bumpers?

Yeah I don’t have a bender, HF kinker did its job for the 4 bends that I needed to make. Front bumper was supposed to wrap around the fender but I kinked it a little too hard so I had to cut the sides off.

 

[FasterNU]

sway away rod end looking just a bit tired. hahaha

 

[Giant Geoff]

Much respect to Isaac! I was at the first one and every lap, he would come by and go behind the start finish so he would not be roasted as a sandbagger and keep it fun plus reduce the haters.

I talked to Brett King and he’s got a ranchero and a Crown Victorian that he wants to bring out.

 

[Isaac.Helton]

Much respect to Isaac! I was at the first one and every lap, he would come by and go behind the start finish so he would not be roasted as a sandbagger and keep it fun plus reduce the haters.

I talked to Brett King and he’s got a ranchero and a Crown Victorian that he wants to bring out.

Thanks Geoff.

 

[Isaac.Helton]

Sent all the junk to powder coat.
Trans mount is done.
Found out the driver beam is cracked… I have a plan for that though.
And If anybody knows what those bumpstops are let me know. Thanks.
View attachment 398C7176-BD25-43A0-A769-B7C64B625871.mp4

 

[Isaac.Helton]

sway away rod end looking just a bit tired. hahaha

Kuster *

 

[Chancegoodman]

Those are some old kuster bumps but I’m pretty sure if you hit up sway away you can get parts from them

 

[Isaac.Helton]

Those are some old kuster bumps but I’m pretty sure if you hit up sway away you can get parts from them

The dude I bought them from said that’s what they were but I wasn’t sure. Thought they might be Marvin Shaw bumps. Thanks

 

[YotaTyler418]

sick 50

 

[Isaac.Helton]

.

 

[YotaTyler418]

Odd looking kingpins

 

[Isaac.Helton]

TTB delete inbound.

 

[YotaTyler418]

Odd Looking Kingpins

 

[84Prerunner]

I’d be more impressed if you only used a corded HF drill and angle grinder….

 

[Jacob Guerrero]

this thing is something thatll race a shitbox race or some shit

 

[Isaac.Helton]

 

[Isaac.Helton]

Hair cut for the upper insert, lowering the upper bearing 3/16”

 

[Isaac.Helton]

I'll post more pictures of the beams soon.
But here's some shocks for the front I snagged in a trade for the original gen 1 raptor shocks.
By the way, whoever rattle canned these whole things white with glitter (shaft, bearings, adjusters and all) I hate you.
Anyways I made them nice again.

 

[Isaac.Helton]