SteveMostly
Member
Stock is 2.3” width 3.0” length
Billet one is 3.9” width 3.0” length
94 ranger build
- Thread starter SteveMostly
- Start date
Billet one is 3.9” width 3.0” length
SteveMostly
Member
Hubs installed. I designed and manufactured these in house
They’re running Camburg drive plates with 2.5” timken bearings
Waiting on caliper mounts should be here Monday/ Tuesday so we can get the rear calipers on
Front brake lines are plumbed
Just gotta mount that oil filter today.
They’re running Camburg drive plates with 2.5” timken bearings
Waiting on caliper mounts should be here Monday/ Tuesday so we can get the rear calipers on
Front brake lines are plumbed
Just gotta mount that oil filter today.
SteveMostly
Member
Been super busy with the shop but I’ve been chugging away at the truck
Got the throttle pedal plate installed
Rear fenders installed , used auto fab fender washers and nutserts to make it easy to remove when needed
Some paneling for the radiator
Interior going in getting seat placement and most the wiring finished up
Got the radiator mounted plumbing was a pain in the ass
Battery trays mounted
Got some cheap wheels and tires to get it on the ground $40 from a homie so sweet seeing it on the ground
Sway bar installed and rear calipers also got the rear coilovers
Starting to really take shape
Got the throttle pedal plate installed
Rear fenders installed , used auto fab fender washers and nutserts to make it easy to remove when needed
Some paneling for the radiator
Interior going in getting seat placement and most the wiring finished up
Got the radiator mounted plumbing was a pain in the ass
Battery trays mounted
Got some cheap wheels and tires to get it on the ground $40 from a homie so sweet seeing it on the ground
Sway bar installed and rear calipers also got the rear coilovers
Starting to really take shape
Attachments
SteveMostly
Member
Front fiberglass showed up
Pulled it outside just to step back and see it
Still needs axles and driveline
Started getting a bumper made up for a skid plate
Sick having the trucks close
My brother got a moruzzi LS dropped in his and is back on the road
Got a diff finally
Bypasses showed up damn these things are nice
Still needs nitrogen in all the rear parts
Got my numbers for the driveline hoping to order that next week
Got the axles ordered this week
Got a skid plate made and bolted that up
Started on the bumpstops and got those mounted
also my sister came up on a smokin deal
We found my brothers old truck that someone had kept in a warehouse near SF pretty much exactly how he sold it $900 I’m pretty sure it was a BD fab build before he bought it
So we have two trucks at the shop again shooting to have all three done for the march short course race
Pulled it outside just to step back and see it
Still needs axles and driveline
Started getting a bumper made up for a skid plate
Sick having the trucks close
My brother got a moruzzi LS dropped in his and is back on the road
Got a diff finally
Bypasses showed up damn these things are nice
Still needs nitrogen in all the rear parts
Got my numbers for the driveline hoping to order that next week
Got the axles ordered this week
Got a skid plate made and bolted that up
Started on the bumpstops and got those mounted
also my sister came up on a smokin dealWe found my brothers old truck that someone had kept in a warehouse near SF pretty much exactly how he sold it $900 I’m pretty sure it was a BD fab build before he bought it
So we have two trucks at the shop again shooting to have all three done for the march short course race
Chancegoodman
Active member
It’s how you make it reliable
SteveMostly
Member
Had some seats from my old sandrail that a threw in
The damn cat go to one of them so that’s gonna be passengers problem till I get them reupholstered lol
Pumper is in and some prp belts
Still wanna get a larger steering wheel but that’ll come later
Made up some mirror mounts to get rid of the stock ones I had makes it look a little sleeker
Got some 3” bypasses still need the mounting hardware for all the shocks in the rear and nitrogen that’s why the reservoirs aren’t mounted yet also went and got some Seymour stainless paint and did the whole back half, painting tubes suck.
Rear bumps installed and made some tube caps out of aluminum
Can’t forget the fire safety also got one under the seat
Limit straps came in too gf got them for me for Valentine’s Day
The damn cat go to one of them so that’s gonna be passengers problem till I get them reupholstered lol
Pumper is in and some prp belts
Still wanna get a larger steering wheel but that’ll come later
Made up some mirror mounts to get rid of the stock ones I had makes it look a little sleeker
Got some 3” bypasses still need the mounting hardware for all the shocks in the rear and nitrogen that’s why the reservoirs aren’t mounted yet also went and got some Seymour stainless paint and did the whole back half, painting tubes suck.
Rear bumps installed and made some tube caps out of aluminum
Can’t forget the fire safety also got one under the seat
Limit straps came in too gf got them for me for Valentine’s Day
