93-97 ranger parts

Thicks91

Well-known member
Joined
Jan 9, 2023
Messages
106
I’ll post pics of this stuff either later today or tomorrow.

Equal length Threat Motorsports beams Dana 44 ends with Dana 44 hubs and Spindles & radius arms. No radius arm or beam mounts just beams and radius arms. - sold

McNeil wish bone 3 link with bolt on upper and lower trailing arm mounts. The trailing arms are 48” fixed bushing front and 1”1/4 him rear, There is no need for extended rod ends. the wish bone is fixed bushing front and 1”1/4 heim rear. This is paired up with a 8.8 ranger axel already tabbed out ready to go. Sold

King prerunner series 2.5x16” coil overs minor pitting at lower portion of shaft but have been cleaned up. Shocks are in great shape and hold nitrogen. Springs included—- SOLD
 
Last edited:
Here’s some pics. Still need to take some of the threat kit
 

Attachments

  • IMG_5224.jpeg
    IMG_5224.jpeg
    528.5 KB · Views: 9
  • IMG_5221.jpeg
    IMG_5221.jpeg
    515.8 KB · Views: 9
  • IMG_5220.jpeg
    IMG_5220.jpeg
    505.4 KB · Views: 10
  • 320EC8E8-51AD-4D31-96C8-5AA41E970F5A.jpeg
    320EC8E8-51AD-4D31-96C8-5AA41E970F5A.jpeg
    257.7 KB · Views: 10
  • BEEC62B7-9322-4417-8969-1139F5271314.jpeg
    BEEC62B7-9322-4417-8969-1139F5271314.jpeg
    243.2 KB · Views: 9
  • 5255CF14-5961-4D6E-82C7-D00B484EBE60.jpeg
    5255CF14-5961-4D6E-82C7-D00B484EBE60.jpeg
    230.8 KB · Views: 9
  • IMG_5223.jpeg
    IMG_5223.jpeg
    425.2 KB · Views: 6
  • IMG_5222.jpeg
    IMG_5222.jpeg
    385.7 KB · Views: 9
Back
Top