86' k5 family wheeler

[Gearmonkey23]

Picked up a 86' k5 blazer recently, gunna see what I can screw up with it. Ive always wanted to "wheel" the dodge as well as just do go fast stuff with it, but im afraid to beat panels up on it because its an absolute beauty. Ive also needed something I can load the family of 4 up in and go out, not worry about turning it into a raisin kind of thing.
The k5 came with the rear of it stacked full of NIB parts. Soft ride 4" leafs, long brake lines, steering box brace, frame plates, new errrthing.. my buddy gave me a price Ide be a fool to turn down, so I snagged it. Now the build is on.
Hopefully by end of my upcoming weekend I'll have it on the new leafs and road worthy as its sat since 2017. Its a SBC 350/700R4, 208, 10B/12B currently. Just scored a D44HD 8 lug front, currently hunting for 14b rear. Plans are to run 37s, lockers, and build sliders, get a cage kit etc etc and just have fun without worries of scratching. I dont want to crawl back door, but I want it capable enough to wheel rubicon and drive home type of thing.
Ill update more as I go!

 

[Gearmonkey23]

Also, if any of you gents or lady bois has 8x6.5 wheels with 37" llantas on em and wants to sell, lemme know...

 

[SEf150]

If you push the front axle forward at least an inch you can avoid cutting the rear of the front fender with 37's
Are you planning on cross over steering and hydro assist? It makes a huge difference with these trucks. Same as swapping over to serpentine belts from the v belts. Gmt 400 stuff bolts right on.
Are you staying with the np208 or swapping it out?
Rear suspension plans?

My 83 way back when it was on 3/4 tons and 37's.

 

[Gearmonkey23]

Ya Im gunna go full crossover when I put the new axle in.
Just picked up a 14B last night for the rear. Ive got brand new bilsteins for f/r in boxes, and its got 4" softride leafs for front and rear on ORD shackles. Ide like to stay with the 208, at least for now until I decide to go doubler case or something. The 208 has a really low ratio.
If I plan on sticking with the leafs front and rear, I guess ide just need to cut and move hangers to move it forward and inch?

 

[Gearmonkey23]

Edit.
ORD "zero rate" springs will move it forward 1.5" for 50 bones!

 

[SEf150]

ORD makes a 1/4 plate you can bolt in to shift it forward up to 1 1/2 with out adding much lift. Or easy to build at home.