2wd f250/f350 suspension; what’s out there?

[Oh4Tahoe]

Contemplating a truck setup for a potential weekend work truck and mild adventures rig. Dentside and newer OBS trucks what’s out there for 2wd suspension to gain some travel and height?

Is there any good suspension stuff out there for 2wd super duties?

 

[Turboyota]

@Giant Geoff

 

[Giant Geoff]

I make a basic kit using the stock beams and you can add a coil over to.
EQ. Length kit that is pretty trick.

 

[Oh4Tahoe]

@Giant Geoff , how much travel does that stock beam setup pull?

How much width does it add?

Is that stuff on your site for research purposes?

 

[Giant Geoff]

@Giant Geoff , how much travel does that stock beam setup pull?

How much width does it add?

Is that stuff on your site for research purposes?

The basic kit with the stock beams, you can widen 4 inch and 6.5 inch with the holes I’ve made in those brackets

The equal length kit starts at 5 inches per side and you can go wider depending on what you want.

Both these kits only work with 99 to 07 trucks.

https://www.giantmotorsports.com/product-category/i-beam-kits/super-duty-eq-beam-kit/

I have a bolt on Engine Cage that is not on the site.

 

[Oh4Tahoe]

@Giant Geoff thanks for the info, got the gears turning

 

[Oh4Tahoe]

@Giant Geoff could the 2wd super duty lift be used on a dually? Is there anything that keeps it from working on a dually?

 

[Giant Geoff]

@Giant Geoff could the 2wd super duty lift be used on a dually? Is there anything that keeps it from working on a dually?

Yes, it should work.

 

[DezrtF2]

Yes, it should wo

Hey Geoff, any plans to make this same thing for newer 2wd F250/F350's AlumiDuty? I have a 2019 F250 2wd and nobody makes lifts for these things.

 

[Giant Geoff]

No, but I'm going to make a conversion kit to mount TTB.

 

[DezrtF2]

Badass! But I already have a F250 with TTB's. I bought a DD Link kit from you a few months back, going to put it on this summer. Need something for the tow pig

 

[Giant Geoff]

Hey Geoff, any plans to make this same thing for newer 2wd F250/F350's AlumiDuty? I have a 2019 F250 2wd and nobody makes lifts for these things.

I really wanted to make the 2020 Alumi-Duty kit, but all the time I spent on it was a waste to try and resell it because the guy wanted to run 42 inch tires with a low ride height, and once we jig up those beams and made crossover steering based off of their center steering garbage (see how I did cross over off the stock draglink). We made a set off the fixtures for another customer with a normal size tire and it sat really low and scrapped trying to offer it.

 

[Oh4Tahoe]

@Giant Geoff what keeps the lift from being able to work with an 08-10 super duty

 

[Giant Geoff]

@Giant Geoff what keeps the lift from being able to work with an 08-10 super duty

It may work, but I’ve never tried it. I’ll get you the parts if you wanna experiment or test fit.

 

[Oh4Tahoe]

@Giant Geoff

Not quite to that point yet, but just trying to brainstorm about how I want to build something by. Thanks for all your input

 

[Giant Geoff]

@Giant Geoff

Not quite to that point yet, but just trying to brainstorm about how I want to build something by. Thanks for all your input

Right on. I’ll ship you the parts and you can play with it. I will not bill you until it fits or if there needs to be any changes then I’ll give you a better deal.

 

[Oh4Tahoe]

Right on. I’ll ship you the parts and you can play with it. I will not bill you until it fits or if there needs to be any changes then I’ll give you a better deal.

That’s awesome, I’ll definitely keep that in mind

 

[Raymoon87]

Hi Giant.
I’m looking for a set of drop down I beam brackets for a 24 F-250 gas. Any suggestions?

 

[Giant Geoff]

Hi Giant.
I’m looking for a set of drop down I beam brackets for a 24 F-250 gas. Any suggestions?

I’m now working on a 3-4” drop bracket for the 2012-2026 F-250 with some help from here as we speak. How much lift are you looking for?

 

[DezrtF2]

Perfect! Good to hear that, I'm looking for 4" for 2019 F250 2wd. I'll keep my eye out for them