2025 Leduc Swap Meet

If anyones going from the north on the 405 / 5 / 10 lmk if you’ve got 10” 2.5 IBP’s or are interested in 10” King 2.5 rr’s, CO’s, or triples. rr’s used no problems, 0 miles on co’s and triples - triples been in the box since I bought them taken out only for mock up.
 
Yup weather forecast shows low 60s which is better than some years. Supposed to have a small chance of snow here in Lucerne Valley on Thursday then back to mid 60's this weekend.
 
Yes. We had snow then 1 week late high 70's. Then back to cold again. It's spring lets act that way
 
UR_Mawm69 said:
ok, kaweschion.

we HAVE to get rid of these 2 "strollers" papa and I built. they just sit under a cover in our backyard.
i know it was a fucked idea to think theyd sell for what we put into them but............. papa is papa.

i also know that no one ON HERE is going to buy them, as everyone could build there own most likely, but if we brought them to the big commiefornia swapmeet.... what do you guys think?
its a far as fuck drive, and if we bring both we'd either need a trailer or 2 trucks.......... sooooooooooo,
papa wants about $1500 each.... but im sure he'd take $1k each now.......
tubing, shocks, seats, belts, tires/wheels, shocks, powder, misc shit.... they were about $2k each to build

we have 2, both powdercoated frames, one black with red subframe and black/red wheels, one black with silver subframe and silver/black wheels

View attachment 34794






View attachment 34795




View attachment 34796
Click to expand...
How much does that shit box weigh?
 
I’ll be there Saturday afternoon. Driving from Ventura county. Planning to bring my son, camp, buy/sell chill.
Basically just cleaning on the garage. Nothing big to sell but the Saturday night shenanigans are always worth the drive.
 
Giant Geoff said:
I'm getting some stuff together to sell. Anyone need any Giant Motorsports parts that I should bring????
Click to expand...
Yeah! A swing steer set of hangers w/ heims and hardware for some hodge podged (supposedly) equal length beams! i can cut the tie rods to length! i promise if you bring them you can PROLLLLLLLLLLY ship them to phx from the swapmeet............ or even! if Willis is out there, GIVE them to him!
ksweetthxluvya!




😂 :ROFLMAO::ROFLMAO:😂:ROFLMAO:😂🙏🙏🙏🙏🙏
 
UR_Mawm69 said:
Yeah! A swing steer set of hangers w/ heims and hardware for some hodge podged (supposedly) equal length beams! i can cut the tie rods to length! i promise if you bring them you can PROLLLLLLLLLLY ship them to phx from the swapmeet............ or even! if Willis is out there, GIVE them to him!
ksweetthxluvya!




😂 :ROFLMAO::ROFLMAO:😂:ROFLMAO:😂🙏🙏🙏🙏🙏
Click to expand...
I have 1 set of WIY beams. I can bring overlay plates for a stock D35or D44 ends, and I have overlays for my Billet D44 & 2wd F-250 ends?
What beam setup do you have? I can bring swingers for different allocations. I don't have any hiem kits.
 
Giant Geoff said:
I have 1 set of WIY beams. I can bring overlay plates for a stock D35or D44 ends, and I have overlays for my Billet D44 & 2wd F-250 ends?
What beam setup do you have? I can bring swingers for different allocations. I don't have any hiem kits.
Click to expand...

you have no idea how much i appreciate your willingness to help a brothaa out......... but for 1, i aint got no money (unless you take a disability and handicap card as a payment?) and 2, i have no idea whatsoever these beams are. i was told 10 years ago that they were equal length (they are mounted to 2 fabbed mounts, but who knows how true and equal they are considering the other shit that was built on this truck...)

i was more or less being the jackass funny guy that i am. hahhaa
 
See attached photo of jakey's beams.

UR_Mawm69

Thread 'Chop Shop Builds'

i REAAAAAAAAAAAAAALLLLLLLLLLLLLLY dont want to retype everything up or even most of or even ANY of it/copy it from my 69k page DR thread......

so, idk if Wallyboy is gonna getmad at me for doing this but ill just post a link to the first page of my DR thread, then some general pics.

im sure once i take the time to do it, ill upload a fuck load of pics/info.


any newbs that dont know me, im Jakey, kinda a big deal, i bang a lot of *****, Bodgjdjsters loves me and im his favorite, i died in 2015 - literally - and now im trying to get my pussygetting truck to be reliable enough to pass...

Jakey wants free stuff given to him aka steering kit but his front end is +69" wide so would need some steering for 10 over beams I would guess
 

Attachments

  • 1.jpg
    1.jpg
    174.3 KB · Views: 2
You must log in or register to reply here.
Back
Top