Turboyota's latest activity
-
brings is to current day, i work on the truck once every week or so since i work my job full time and little by little chipping away at... -
built some abs plastic cover ups for the dashboard. ordered my rear axle. got the BMS 55 inch links, Mazulla front hubs and Jamar rear...
-
frame horns cut off placed an order for 4 coilovers. 2.5x10 and 2.5x16 bypasses 3.0x10 and 3.5x18 4 bump stops. 2.0s up front and 2.5s...
-
welded the lower tubes to the frame inside the frame. then plated it in in the C channel (forgot to take photos lol) plated the 2 tubes...
-
This is where i decided i wanted to link the truck instead of leaf springs. and really realized i should have just bought a stock truck...
-
finished the cage, built cab tie ins and floor close plates, stitch welded all of them in, and then silicone sealed the floor plates. i...
-
so in febraury of 2025 is when i put the truck up on jackstands and started to tear into it, luckily had guidance of a few friends who...
-
-
After a few of my friends that are on here have been convincing me to make a build thread on my truck, i decided to do so, i bought this...
-
Turboyota reacted to turbomonty's post in the thread The Turbo Glue Factory: Boosted Colt Build with
Like.
Time to finish up some welds -
Turboyota reacted to GearheadGrind's post in the thread The rebuild thread for my 1972 Chevy Stepside: Stubbs with
Wow.
Hey all, I'm a relatively new joiner but met some of you out at KOH this year. I had just finished my build and had a bad night on the... -
.
-
the family wagon is done for the time being!!!
-
Hey everyone! I’m not cool enough or have the skills to build a real truck so I got an overpriced golf cart to bolt stuff on to. 2025...
-
Full bump, centered in the wheel well, tire has probably around 6 inches turning radius both directions. I could probably push it...