troysladeck's latest activity
-
troysladeck replied to the thread RHDTTBXJ.View from camp was top tier. Another 40 ish miles done yesterday. No big issues so far, just minor brake stuff. Really happy with the... -
-
why haven’t you jumped it yet
-
troysladeck replied to the thread RHDTTBXJ.Aaaaaaand straight to a week long camp trip 🍻 Camping up on the Mogollon Rim for two nights, then Sedona, then Cinder Hills for the...
-
-
troysladeck replied to the thread RHDTTBXJ.Used the trusty hi lift to take a 1/2” of preload out. Ride height looks tits now
-
-
troysladeck replied to the thread RHDTTBXJ.Shes a runner. May lower the front a tad. List is getting really short; just have to change out the driveshaft u joint to a 1330, bleed...
-
-
troysladeck replied to the thread RHDTTBXJ.Well I successfully built from scratch the worst type of ttb steering 🤣 I’m beat and my brain is fried. I was hoping stock bronco...
-
-
troysladeck reacted to DefiantOne13's post in the thread 88 Toyota 4runner build (Old Red) with
Like.
So after about another year I changed some things up again. I added Fox bypass’s and bumps to the front. Front bumper, 9k warn winch... -
troysladeck reacted to DefiantOne13's post in the thread 88 Toyota 4runner build (Old Red) with Like.
Took it out and enjoyed it and had a blast honestly. Put new wheels on it which I hated immediately after I bolted them on 🤷🏼♂️ About a...
-
Changed the shape of the swingers to make clearance, dropped the crossover tube from 1.5" to 1.25", and moved it rearward a bit on the...
-
troysladeck replied to the thread RHDTTBXJ.There isn’t any room to do any sort of bracing on the left side of the crossmember with the 3rd and driveshaft installed. That right...
-
-
troysladeck replied to the thread RHDTTBXJ.I did mine slightly different than yours I think. I kept it flat on the back side edge of the beam and then bent it inwards on the last...
-
troysladeck replied to the thread RHDTTBXJ.Ran into my first issue with the diff installed. Apparently I welded the back reinforcement plate in the wrong spot. It made sense to me...
-
-
Sunday Funday mountain rip Dirt miles: 25~ish Near Beers: 1 Children: 5 Snacks: Snickers ice cream bars & skittles gummies Vehicles...
-
I just moved the steering to on top of the knuckle and it reduces bumpsteer at droop, gains a small amount at bump. I won't be doing it...
-
troysladeck replied to the thread RHDTTBXJ.Short answer, no. I haven't put the axles in the beams yet (mainly because the axle shafts and 3rd member have been torn apart) but I...
-
